EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tailoring the weld microstructure to prevent solidification cracking in remote laser welding of AA6005 aluminium alloys using adjustable ringmode beam

Venkat Vivek Pamarthi, Tianzhu Sun, Abhishek Das, Pasquale Franciosa

Journal of Materials Research and Technology · 2023-07 · 25 · 7154-7168

DOI: 10.1016/j.jmrt.2023.07.154 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Materials Research and Technology, 2023-07. Verfasst von Venkat Vivek Pamarthi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solidification cracking is a prevalent defect in welding aluminium alloys which can be effectively mitigated by employing grain refinement strategies. This paper investigates the feasibility of tailoring the weld zone grain structure of 6xxx series aluminium alloys using an adjustable ring mode (ARM) laser beam to reduce the centreline cracking susceptibility. An in-process monitoring approach, comprising a high-speed camera and an ad-hoc Digital Image Correlation, was adopted to examine the strain development during laser welding on a self-restraint test rig. Results revealed that transverse strain in the weld centre exhibits a parabola-like relationship with the core/ring power ratio, with the minimum strain determined at the power ratio of ~1.5, regardless of the total power employed. The microstructural analysis demonstrated that increasing the core/ring power ratio can lead to the refinement of columnar and equiaxed grains. Furthermore, the formation of secondary equiaxed grains is promoted when the power ratio increases, and this is proved to be related to the characteristic of the ARM laser by the like-for-like comparison. Overall, a fine-tuned power ratio of 1.5 is determined in the studied material and welding config-uration for achieving a centreline crack free weld, benefiting from the improved micro-structure and reduced thermal strain. ©

Zitieren

APA

Pamarthi, V. V., Sun, T., Das, A., & Franciosa, P. (2023). Tailoring the weld microstructure to prevent solidification cracking in remote laser welding of AA6005 aluminium alloys using adjustable ringmode beam. Journal of Materials Research and Technology, 25, 7154-7168. https://doi.org/10.1016/j.jmrt.2023.07.154

Vancouver

Pamarthi VV, Sun T, Das A, Franciosa P. Tailoring the weld microstructure to prevent solidification cracking in remote laser welding of AA6005 aluminium alloys using adjustable ringmode beam. Journal of Materials Research and Technology. 2023;25:7154-7168. doi:10.1016/j.jmrt.2023.07.154

BibTeX
@article{Pamarthi2023,
  author = {Pamarthi, Venkat Vivek and Sun, Tianzhu and Das, Abhishek and Franciosa, Pasquale},
  title = {Tailoring the weld microstructure to prevent solidification cracking in remote laser welding of AA6005 aluminium alloys using adjustable ringmode beam},
  journal = {Journal of Materials Research and Technology},
  year = {2023},
  volume = {25},
  pages = {7154--7168},
  doi = {10.1016/j.jmrt.2023.07.154}
}
Kostenlos starten →