EUVIMEDEUVIMED entdecken
Crossref

Modeling flow in 3D vegetation structures for wildland fire simulations using a localized drag force formulation

Eric Victor Mueller, Kunhyuk Sung, Anthony Hamins

Journal of Fluids and Structures · 2026-07 · 144 · 104545

DOI: 10.1016/j.jfluidstructs.2026.104545 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluids and Structures, 2026-07. Verfasst von Eric Victor Mueller und 2 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The interaction of wind and vegetation through drag forces plays an important role in wildland fire behavior and is, therefore, a key component to detailed models of such fires. This study evaluates a typical approach applied in Computational Fluid Dynamics (CFD) wildland fire models. Vegetation is represented as a dispersed media comprised of numerous subgrid-scale particles, each contributing to the total local drag. The numerical approach was evaluated against force and velocity measurements made in a small-scale wind tunnel. Specimens of differing structural form were tested, starting from a collection of screens which are well-represented by the model formulation and increasing in complexity to bundles of thin wood fibers (excelsior), and on to branches of real trees. This increasing complexity enabled a progressive evaluation of the limits of the model assumptions. Though careful characterization of sample properties, e.g. the packing ratio and surface-to-volume ratio, was required, the model performed well using a priori assumptions for specimens which had simple uniform or statistically isotropic particle arrangements. For real vegetation, however, empirical tuning of the model parameters was required. It has been suggested that this is linked to both increased complexity in particle orientation and the potential flexibility in plant structure, which was not considered in the model formulation.

Zitieren

APA

Mueller, E. V., Sung, K., & Hamins, A. (2026). Modeling flow in 3D vegetation structures for wildland fire simulations using a localized drag force formulation. Journal of Fluids and Structures, 144, 104545. https://doi.org/10.1016/j.jfluidstructs.2026.104545

Vancouver

Mueller EV, Sung K, Hamins A. Modeling flow in 3D vegetation structures for wildland fire simulations using a localized drag force formulation. Journal of Fluids and Structures. 2026;144:104545. doi:10.1016/j.jfluidstructs.2026.104545

BibTeX
@article{Mueller2026,
  author = {Mueller, Eric Victor and Sung, Kunhyuk and Hamins, Anthony},
  title = {Modeling flow in 3D vegetation structures for wildland fire simulations using a localized drag force formulation},
  journal = {Journal of Fluids and Structures},
  year = {2026},
  volume = {144},
  pages = {104545},
  doi = {10.1016/j.jfluidstructs.2026.104545}
}
Kostenlos starten →