Hydrogen production from dry reforming of methane, using CO2 previously chemisorbed in the Li6Zn1-xNixO4 solid solution
Journal of Environmental Sciences · 2025
DOI: 10.1016/j.jes.2023.12.015 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Environmental Sciences, 2025. Verfasst von Yocelin B González-González und 3 weiteren Autor:innen. Beteiligte Einrichtung: Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito exterior s/n, Ciudad Universitaria, Del. Coyoacán, CP 0…. Hauptthemen laut MEDLINE: Hydrogen, Methane, Carbon Dioxide. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 79 Literaturangaben.
Abstract (Originalsprache)
Li6ZnO4 was chemically modified by nickel addition, in order to develop different compositions of the solid solution Li6Zn1-xNixO4. These materials were evaluated bifunctionally; analyzing their CO2 capture performances, as well as on their catalytic properties for H2 production via dry reforming of methane (DRM). The crystal structures of Li6Zn1-xNixO4 solid solution samples were determined through X-ray diffraction, which confirmed the integration of nickel ions up to a concentration around 20 mol%, meanwhile beyond this value, a secondary phase was detected. These results were supported by XPS and TEM analyses. Then, dynamic and isothermal thermogravimetric analyses of CO2 capture revealed that Li6Zn1-xNixO4 solid solution samples exhibited good CO2 chemisorption efficiencies, similarly to the pristine Li6ZnO4 chemisorption trends observed. Moreover, a kinetic analysis of CO2 isothermal chemisorptions, using the Avrami-Erofeev model, evidenced an increment of the constant rates as a function of the Ni content. Since Ni2+ ions incorporation did not reduce the CO2 capture efficiency and kinetics, the catalytic properties of these materials were evaluated in the DRM process. Results demonstrated that nickel ions favored hydrogen (H2) production over the pristine Li6ZnO4 phase, despite a second H2 production reaction was determined, methane decomposition. Thereby, Li6Zn1-xNixO4 ceramics can be employed as bifunctional materials.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito exterior s/n, Ciudad Universitaria, Del. Coyoacán, CP 04510, CdMx, Mexico.
- Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Circuito exterior s/n, Ciudad Universitaria, Del. Coyoacán, CP 04510, CdMx, Mexico. Electronic address: pfeiffer@materiales.unam.mx.
Zitieren
APA
González-González, Y. B., Plascencia-Hernández, F., Mendoza-Cruz, R., & Pfeiffer, H. (2025). Hydrogen production from dry reforming of methane, using CO2 previously chemisorbed in the Li6Zn1-xNixO4 solid solution. Journal of Environmental Sciences. https://doi.org/10.1016/j.jes.2023.12.015
Vancouver
González-González YB, Plascencia-Hernández F, Mendoza-Cruz R, Pfeiffer H. Hydrogen production from dry reforming of methane, using CO2 previously chemisorbed in the Li6Zn1-xNixO4 solid solution. Journal of Environmental Sciences. 2025. doi:10.1016/j.jes.2023.12.015
BibTeX
@article{GonzlezGonzlez2025,
author = {González-González, Yocelin B and Plascencia-Hernández, Fernando and Mendoza-Cruz, Rubén and Pfeiffer, Heriberto},
title = {Hydrogen production from dry reforming of methane, using CO2 previously chemisorbed in the Li6Zn1-xNixO4 solid solution},
journal = {Journal of Environmental Sciences},
year = {2025},
doi = {10.1016/j.jes.2023.12.015}
}
EUVIMED