EUVIMEDEUVIMED entdecken
Crossref

3D-printed MoS2/Ni electrodes with excellent electro-catalytic performance and long-term stability for dechlorination of florfenicol

Jianhui Xu, Pengxu Wang, Shenggui Chen, Lei Li, Dan Li, Yunfei Zhang, Qi Wu, Jinhong Fan, Luming Ma

Journal of Environmental Sciences · 2024-03 · 137 · 420-431

DOI: 10.1016/j.jes.2022.11.004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Environmental Sciences, 2024-03. Verfasst von Jianhui Xu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Environment and Civil Engineering, Dongguan University of Technology, Dongguan 523808, China. Hauptthemen laut MEDLINE: Molybdenum, Metals. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: Special Project for Research and Development in Key areas of Guangdong Province, Basic and Applied Basic Research Foundation of Guangdong Province, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Here, we report the production of 3D-printed MoS2/Ni electrodes (3D-MoS2/Ni) with long-term stability and excellent performance by the selective laser melting (SLM) technique. As a cathode, the obtained 3D-MoS2/Ni could maintain a degradation rate above 94.0% for florfenicol (FLO) when repeatedly used 50 times in water. We also found that the removal rate of FLO by 3D-MoS2/Ni was about 12 times higher than that of 3D-printed pure Ni (3D-Ni), attributed to the improved accessibility of H*. In addition, the electrochemical characterization results showed that the electrochemically active surface area of the 3D-MoS2/Ni electrode is about 3-fold higher than that of the 3D-Ni electrode while the electrical resistance is 4 times lower. Based on tert-butanol suppression, electron paramagnetic resonance and triple quadrupole mass spectrometer experiments, a "dual path" mechanism and possible degradation pathway for the dechlorination of FLO by 3D-MoS2/Ni were proposed. Furthermore, we also investigated the impacts of the cathode potential and the initial pH of the solution on the degradation of FLO. Overall, this study reveals that the SLM 3D printing technique is a promising approach for the rapid fabrication of high-stability metal electrodes, which could have broad application in the control of water contaminants in the environmental field.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

MolybdenumMetalsWaterElectrodesThiamphenicol

Stichwörter der Autor:innen

3D-printAntibiotic FlorfenicolElectroreductionMoS(2)/Ni

Substanzen

MolybdenumMetalsWaterflorfenicolThiamphenicol

Autor:innen und Institutionen

  • School of Environment and Civil Engineering, Dongguan University of Technology, Dongguan 523808, China.
  • School of Art and Design, Guangzhou Panyu Polytechnic, Guangzhou 511483, China; Dongguan Institute of Science and Technology Innovation, Dongguan University of Technology, Dongguan 523808, China; School of Mechanical En…
  • School of Environment and Civil Engineering, Dongguan University of Technology, Dongguan 523808, China; National Engineering Research Center for Urban Pollution Control, State Key Laboratory of Pollution Control and Res…
  • National Engineering Research Center for Urban Pollution Control, State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092, Chin…

Förderung

  • Special Project for Research and Development in Key areas of Guangdong Province
  • Basic and Applied Basic Research Foundation of Guangdong Province
  • National Natural Science Foundation of China

Zitieren

APA

Xu, J., Wang, P., Chen, S., Li, L., Li, D., Zhang, Y., Wu, Q., Fan, J., & Ma, L. (2024). 3D-printed MoS2/Ni electrodes with excellent electro-catalytic performance and long-term stability for dechlorination of florfenicol. Journal of Environmental Sciences, 137, 420-431. https://doi.org/10.1016/j.jes.2022.11.004

Vancouver

Xu J, Wang P, Chen S, Li L, Li D, Zhang Y, et al. 3D-printed MoS2/Ni electrodes with excellent electro-catalytic performance and long-term stability for dechlorination of florfenicol. Journal of Environmental Sciences. 2024;137:420-431. doi:10.1016/j.jes.2022.11.004

BibTeX
@article{Xu2024,
  author = {Xu, Jianhui and Wang, Pengxu and Chen, Shenggui and Li, Lei and Li, Dan and Zhang, Yunfei and Wu, Qi and Fan, Jinhong and Ma, Luming},
  title = {3D-printed MoS2/Ni electrodes with excellent electro-catalytic performance and long-term stability for dechlorination of florfenicol},
  journal = {Journal of Environmental Sciences},
  year = {2024},
  volume = {137},
  pages = {420--431},
  doi = {10.1016/j.jes.2022.11.004}
}
Kostenlos starten →