Decoupling clinker technology from cement product emissions: A macroeconomic ML–LCA framework for global embodied carbon policy screening
Journal of Environmental Management · 2026-07 · 413 · 130402
DOI: 10.1016/j.jenvman.2026.130402 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Environmental Management, 2026-07. Verfasst von Dilba Rayaru Kandiyil und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering and Built Environment, Liverpool John Moores University, UKLiverpool, L3 3AF, UK; Faculty of Engineering and Construction…. Hauptthemen laut MEDLINE: Construction Materials. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The cement industry contributes approximately 7-8% of global anthropogenic CO2 emissions, yet accurate cradle-to-gate embodied carbon estimation requires plant-level inventory data that are largely unavailable across developing and emerging economies. This data scarcity constrains global benchmarking and the implementation of emerging embodied carbon regulations. This study proposes a STIRPAT-grounded hybrid machine learning-life cycle assessment (ML-LCA) framework for estimating national-scale cement embodied carbon using exclusively publicly available macroeconomic data. GDP per capita, population, and temporal indicators are used to predict the clinker-to-cement ratio (CCR), which is subsequently propagated through a technology-stratified, process-based LCA model enforcing stoichiometric and thermodynamic constraints across A1-A3 stages. Among seven candidate algorithms, Gradient Boosting was selected for its smooth non-linear approximation and LCA integration suitability. SHAP analysis confirms GDP per capita as the dominant CCR driver, with contributions directionally consistent with established technology diffusion theory, ensuring model transparency. Validation across 18 economies through statistical metrics, residual diagnostics, country-level diagnostic benchmarking, Leave-One-Country-Out (LOCO) cross-validation, and three independent literature-benchmarking countries (Pakistan, Mexico, Spain) confirms physically plausible and externally consistent outputs ranging from 0.53 to 0.97 kg CO2/kg cement. A central methodological contribution is the ability to estimate the clinker-substitution decoupling effect at the country scale using only macroeconomic inputs, in contexts where plant-level LCA inventory data are unavailable. Conventional LCA already separates process, energy, and material composition contributions when inventory data are present; the present framework extends this separation to data-scarce national contexts. At the system level, an Environmental Kuznets Curve-type pattern is qualitatively reproduced when model outputs are aggregated across countries, providing a coherence check on the framework as a whole. Out-of-country generalisation is assessed using Leave-One-Country-Out (LOCO) cross-validation as the primary protocol (mean fold RMSE 0.077; 12 of 18 folds below RMSE 0.10), with a forward-chaining temporal split as a complementary diagnostic. The framework is operationalised through an interactive decision-support interface, offering a scalable, transparent baseline for embodied carbon benchmarking, policy screening, and net-zero pathway evaluation in the global cement sector. The framework is positioned as a screening-level reference for data-scarce contexts, complementary to plant-level LCA and Environmental Product Declarations where these are available.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Civil Engineering and Built Environment, Liverpool John Moores University, UKLiverpool, L3 3AF, UK; Faculty of Engineering and Construction, OU|Liverpool John Moores University, Al Amir street, Qatar. Electron…
- School of Civil Engineering and Built Environment, Liverpool John Moores University, UKLiverpool, L3 3AF, UK. Electronic address: m.m.sadique@ljmu.ac.uk.
- School of Civil Engineering and Built Environment, Liverpool John Moores University, UKLiverpool, L3 3AF, UK. Electronic address: d.y.lee@ljmu.ac.uk.
- School of Civil Engineering and Built Environment, Liverpool John Moores University, UKLiverpool, L3 3AF, UK. Electronic address: j.amoakoattah@ljmu.ac.uk.
- Faculty of Engineering and Construction, OU|Liverpool John Moores University, Al Amir street, Qatar. Electronic address: rafal.a@oryx.edu.qa.
Zitieren
APA
Kandiyil, D. R., Sadique, M., Lee, D., Amoako-Attah, J., & Al Mufti, R. (2026). Decoupling clinker technology from cement product emissions: A macroeconomic ML–LCA framework for global embodied carbon policy screening. Journal of Environmental Management, 413, 130402. https://doi.org/10.1016/j.jenvman.2026.130402
Vancouver
Kandiyil DR, Sadique M, Lee D, Amoako-Attah J, Al Mufti R. Decoupling clinker technology from cement product emissions: A macroeconomic ML–LCA framework for global embodied carbon policy screening. Journal of Environmental Management. 2026;413:130402. doi:10.1016/j.jenvman.2026.130402
BibTeX
@article{Kandiyil2026,
author = {Kandiyil, Dilba Rayaru and Sadique, Monower and Lee, Denise and Amoako-Attah, Joseph and Al Mufti, Rafal},
title = {Decoupling clinker technology from cement product emissions: A macroeconomic ML–LCA framework for global embodied carbon policy screening},
journal = {Journal of Environmental Management},
year = {2026},
volume = {413},
pages = {130402},
doi = {10.1016/j.jenvman.2026.130402}
}
EUVIMED