Recovery of Fe2+ from stainless steel scrap cathodes in the Fenton reaction
Journal of Environmental Management · 2026
DOI: 10.1016/j.jenvman.2025.128508 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Environmental Management, 2026. Verfasst von Bingnan Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Geography and Remote Sensing Sciences, Xinjiang University, Urumqi, 830046, China. Hauptthemen laut MEDLINE: Iron, Electrodes. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, National Natural Science Foundation of China.
Abstract (Originalsprache)
Fenton oxidation technology can generate highly reactive free radicals through a series of processes and is widely used for advanced mineralization treatment of industrial wastewater. However, its oxidation rate is limited by the regeneration of Fe2+. This research was based on the Fenton principle and combined with electrochemistry to develop a ferric ion recycling system using discarded stainless steel as the cathode. This system regenerates Fe2+ through electrochemical reduction, catalyzes hydrogen peroxide to produce hydroxyl radicals, and then degrades pollutants. Results show that after filling the cathode with stainless steel scrap, its electrochemical active area reaches 2633 cm2. At a current density of 0.6 mA cm-2 and an influent flow rate of 80 mL min-1, the regeneration efficiency of iron ions reaches 83 % within 70 min, with a current efficiency of 93 % and energy consumption of 8.21 × 10-4 kWh g-1 Fe2+. After adding hydrogen peroxide at a COD:H2O2 ratio of 1:1.5, the electrochemical system could remove 97 % of phenol and 90 % of COD, with an energy consumption of 4.21 × 10-5 kWh g-1 COD. The reaction mechanism of the electrochemical system was verified through electrochemical analysis and quenching experiments. Results indicate that the direct oxidative degradation effect of the electrode on pollutants is minimal, and the degradation of pollutants primarily originates from the oxidation of •OH, which is generated by the Fenton reaction catalyzed by Fe2+. The electrochemical system developed in this study exhibits high stability, enabling the effective degradation of pollutants while achieving the resource utilization of metal waste and iron sludge. This provides technical support for its industrial application.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- College of Geography and Remote Sensing Sciences, Xinjiang University, Urumqi, 830046, China.
- School of Earth Sciences and Engineering, Hohai University, Nanjing, 211100, China.
- College of Geography and Remote Sensing Sciences, Xinjiang University, Urumqi, 830046, China. Electronic address: xiangli@xju.edu.cn.
- School of Resource and Environmental Sciences, Wuhan University, Wuhan, 430079, China.
- Institute of Loess Plateau, Shanxi University, Taiyuan, 030031, China.
- Second Monitoring and Application Center of China Earthquake Administration, Xi'an, 710054, China.
Förderung
- China Postdoctoral Science Foundation
- National Natural Science Foundation of China
Zitieren
APA
Li, B., Shi, J., Li, X., Ding, J., Wang, J., Wu, D., He, X., & Zhang, Y. (2026). Recovery of Fe2+ from stainless steel scrap cathodes in the Fenton reaction. Journal of Environmental Management. https://doi.org/10.1016/j.jenvman.2025.128508
Vancouver
Li B, Shi J, Li X, Ding J, Wang J, Wu D, et al. Recovery of Fe2+ from stainless steel scrap cathodes in the Fenton reaction. Journal of Environmental Management. 2026. doi:10.1016/j.jenvman.2025.128508
BibTeX
@article{Li2026,
author = {Li, Bingnan and Shi, Jinlong and Li, Xiang and Ding, Jianli and Wang, Jinjie and Wu, Dongxing and He, Xinlei and Zhang, Yuan},
title = {Recovery of Fe2+ from stainless steel scrap cathodes in the Fenton reaction},
journal = {Journal of Environmental Management},
year = {2026},
doi = {10.1016/j.jenvman.2025.128508}
}
EUVIMED