EUVIMEDEUVIMED entdecken
Crossref

Improving landfill liner performance with bentonite-slag blend permeated with ammonia for a Municipal solid waste landfill

Aswathy C M, B M Sunil

Journal of Environmental Management · 2024-09 · 367 · 122013

DOI: 10.1016/j.jenvman.2024.122013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Environmental Management, 2024-09. Verfasst von Aswathy C M und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, National Institute of Technology Karnataka, Srinivasnagar P.O, Mangalore, Karnataka 575 025, India; Department of Ci…. Hauptthemen laut MEDLINE: Bentonite, Ammonia, Solid Waste, Waste Disposal Facilities. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 41 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Leachate emanating from landfills contains ammonia which may cause serious health effects on living things. An effectively designed clay barrier should not allow the contaminant to infiltrate the soil and groundwater systems. The utilization of certain industrial by-products in engineered landfill barriers, not only reduces the need for conventional liner materials but also helps in sustainable waste management. This study investigated the hydraulic conductivity, unconfined compressive strength, compaction, and adsorption characteristics of lithomargic clay blended with an optimum percentage of bentonite (10%) and granulated blast furnace slag (15%) permeated with ammonia. The results revealed that increasing the content of granulated blast furnace slag decreased the maximum dry density while increasing the optimum moisture content. In comparison to lithomargic clay, the hydraulic conductivity of the amended soil liner permeated with ammonia decreased from a value of 3 × 10-8 m/s to 5 × 10-10 m/s. The unconfined compressive strength of the amended soil specimens showed an increasing trend with curing times (i.e., 0, 14, 28, and 56 days). The batch adsorption results revealed that Freundlich and Langmuir's isotherm fits the equilibrium adsorption data and the adsorption of ammonia on clay liner follows non-linear behaviour. Overall, the experimental results implied that lithomargic clay blended with 10% bentonite and 15% granulated blast furnace slag can be used as an impermeable soil reactive barrier in engineered landfills.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BentoniteAmmoniaSolid WasteWaste Disposal FacilitiesAdsorptionRefuse DisposalSoilWaste ManagementWater Pollutants, ChemicalClay

Stichwörter der Autor:innen

AmmoniaGranulated blast furnace slagLithomargic clayReactive barrierWaste managementlandfill liner

Substanzen

BentoniteAmmoniaSolid WasteSoilWater Pollutants, ChemicalClay

Autor:innen und Institutionen

  • Department of Civil Engineering, National Institute of Technology Karnataka, Srinivasnagar P.O, Mangalore, Karnataka 575 025, India; Department of Civil Engineering, St. Joseph College of Engineering Vamanjoor P.O, Mang…
  • Department of Civil Engineering, National Institute of Technology Karnataka, Srinivasnagar P.O, Mangalore, Karnataka 575 025, India. Electronic address: sunilbm@nitk.edu.in.

Zitieren

APA

C M, A., & Sunil, B. M. (2024). Improving landfill liner performance with bentonite-slag blend permeated with ammonia for a Municipal solid waste landfill. Journal of Environmental Management, 367, 122013. https://doi.org/10.1016/j.jenvman.2024.122013

Vancouver

C M A, Sunil BM. Improving landfill liner performance with bentonite-slag blend permeated with ammonia for a Municipal solid waste landfill. Journal of Environmental Management. 2024;367:122013. doi:10.1016/j.jenvman.2024.122013

BibTeX
@article{CM2024,
  author = {C M, Aswathy and Sunil, B M},
  title = {Improving landfill liner performance with bentonite-slag blend permeated with ammonia for a Municipal solid waste landfill},
  journal = {Journal of Environmental Management},
  year = {2024},
  volume = {367},
  pages = {122013},
  doi = {10.1016/j.jenvman.2024.122013}
}
Kostenlos starten →