Co-utilization of iron ore tailings and coal fly ash for porous ceramsite preparation: Optimization, mechanism, and assessment
Journal of Environmental Management · 2023
DOI: 10.1016/j.jenvman.2023.119273 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Environmental Management, 2023. Verfasst von Penghui Guo und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, 100083, China. Hauptthemen laut MEDLINE: Coal Ash, Coal. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 56 Literaturangaben.
Abstract (Originalsprache)
Maximizing the utilization of industrial by-products, such as iron ore tailings (IOTs) and coal fly ash (CFA), is crucial toward sustainable development. This study provides a meticulous insight into the optimization, mechanism, and assessment of the co-utilization of IOTs and CFA for the preparation of porous ceramsite. Micro-CT results revealed that the prepared ceramsite exhibited an exceptional porosity, peaking at 56.98%, with a wide range of pore diameters (3.55-959.10 μm) under optimal conditions (IOTs content at 76%, preheating at 550 °C for 15 min, and sintering at 1177 °C for 14 min), while maintaining good mechanical properties (water adsorption of 1.28%, comprehensive strength of 8.75 MPa, apparent density of 1.37 g/cm3, and bulk density of 0.62 g/cm3). The primary parameters affecting the porosity were identified and ranked as follows: sintering temperature > IOTs content > sintering time. The formation and growth of pores could be attributed to the equilibrium relationship between the liquid-phase surface tension and the gas expansion force, accompanied by pore wall thinning and pore merging. Notably, the prepared ceramsite is both ecologically feasible and economically rewarding, boasting a profit margin of 9.47 $/ton. The comprehensive life cycle assessment (LCA) conducted further highlights the potential of its large-scale implementation for promoting sustainable development. This study provides an innovative strategy for the co-utilization of IOTs and CFA, with advantages such as cost-effectiveness, ecological feasibility and scalability of production.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, 100083, China.
- Institute for Carbon Neutrality, University of Science and Technology Beijing, Beijing, 100083, China; Beijing Advanced Innovation Center for Materials Genome Engineering, University of Science and Technology Beijing, B…
- School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, 100083, China. Electronic address: lisuqin@ustb.metall.edu.cn.
Zitieren
APA
Guo, P., Zhao, Z., Li, Y., Zhang, Y., He, T., Hou, X., & Li, S. (2023). Co-utilization of iron ore tailings and coal fly ash for porous ceramsite preparation: Optimization, mechanism, and assessment. Journal of Environmental Management. https://doi.org/10.1016/j.jenvman.2023.119273
Vancouver
Guo P, Zhao Z, Li Y, Zhang Y, He T, Hou X, et al. Co-utilization of iron ore tailings and coal fly ash for porous ceramsite preparation: Optimization, mechanism, and assessment. Journal of Environmental Management. 2023. doi:10.1016/j.jenvman.2023.119273
BibTeX
@article{Guo2023,
author = {Guo, Penghui and Zhao, Zekun and Li, Yongkui and Zhang, Yabin and He, Tao and Hou, Xinmei and Li, Suqin},
title = {Co-utilization of iron ore tailings and coal fly ash for porous ceramsite preparation: Optimization, mechanism, and assessment},
journal = {Journal of Environmental Management},
year = {2023},
doi = {10.1016/j.jenvman.2023.119273}
}
EUVIMED