Accuracy of digital impressions for implant-supported complete-arch prosthesis when using an auxiliary geometry device
Journal of Dental Sciences · 2023-04 · 18 (2) · 808-813
DOI: 10.1016/j.jds.2023.01.012 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Dental Sciences, 2023-04. Verfasst von Hale Arikan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Faculty of Dentistry, Hacettepe University, Ankara, Turkey. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Background/purpose: Digital impressions using intraoral scanners have recently gained popularity. The aim of the present study was to evaluate the fit of full-arch screw-retained cobalt-chromium frameworks fabricated via two different digital impression methods. Materials and methods: An edentulous resin master model with four dental implants was fabricated. Forty cobalt-chromium superstructures were fabricated and evaluated according to four groups. In Group 1, the superstructures were evaluated using an intraoral scanner to generate digital impressions. Group 2 relied on the help of an auxiliary geometric appliance in generation of digital impressions via intraoral scanner. The traditional method of splinted open-tray conventional impressions was designated for Group 3. Finally, the control group (Group 4) relied on scanning of the master model directly with a laboratory scanner. Vertical marginal discrepancy was evaluated, and data obtained were statistically analyzed.
Results
The highest mean vertical marginal gap value (80.86 ± 50.06 μm) was observed for Group 1 and statistically higher than Group 2, 3, and 4 (P 0.05).
Conclusion
It has been suggested that the use of auxiliary geometric appliances yields increased scanning accuracy. Frameworks fabricated using the traditional splinted open-tray technique were more reliable compared to those frameworks from digital impressions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics, Faculty of Dentistry, Hacettepe University, Ankara, Turkey.
- Department of Prosthodontics, New York University College of Dentistry, New York, NY, USA.
- New York University College of Dentistry, New York, NY, USA.
Zitieren
APA
Arikan, H., Muhtarogullari, M., Uzel, S. M., Guncu, M. B., Aktas, G., Marshall, L. S., & Turkyilmaz, I. (2023). Accuracy of digital impressions for implant-supported complete-arch prosthesis when using an auxiliary geometry device. Journal of Dental Sciences, 18(2), 808-813. https://doi.org/10.1016/j.jds.2023.01.012
Vancouver
Arikan H, Muhtarogullari M, Uzel SM, Guncu MB, Aktas G, Marshall LS, et al. Accuracy of digital impressions for implant-supported complete-arch prosthesis when using an auxiliary geometry device. Journal of Dental Sciences. 2023;18(2):808-813. doi:10.1016/j.jds.2023.01.012
BibTeX
@article{Arikan2023,
author = {Arikan, Hale and Muhtarogullari, Mehmet and Uzel, Sema Merve and Guncu, Mustafa Baris and Aktas, Guliz and Marshall, Lindsay Simone and Turkyilmaz, Ilser},
title = {Accuracy of digital impressions for implant-supported complete-arch prosthesis when using an auxiliary geometry device},
journal = {Journal of Dental Sciences},
year = {2023},
volume = {18},
number = {2},
pages = {808--813},
doi = {10.1016/j.jds.2023.01.012}
}
EUVIMED