Experimental and reactive transport modeling study of direct lithium extraction From brines with Li/Al-layered double hydroxides
Journal of Contaminant Hydrology · 2025
DOI: 10.1016/j.jconhyd.2025.104693 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Contaminant Hydrology, 2025. Verfasst von Muhammed Rashik Mojid und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Petroleum Engineering, University of Houston, 5000 Gulf Freeway, Building 9, Houston, TX 77204, USA. Hauptthemen laut MEDLINE: Lithium, Hydroxides, Aluminum. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 66 Literaturangaben. Gefördert von: National Science foundation, University of Houston, National Science Foundation Division of Chemical Bioengineering Environmental and Transport Systems.
Abstract (Originalsprache)
The global demand for lithium (Li) has surged in the past decade due to the rapid adoption of Li-ion batteries, particularly in the electrification of transportation. Approximately 70 % of the world's Li is sourced from natural brines, which also contain high concentrations of competing cations such as sodium (Na+), magnesium (Mg2+), and calcium (Ca2+), posing significant challenges for selective Li recovery. This study explores the selective extraction of Li+ from synthetic brines using Li/aluminum (Al)-layered double hydroxides (Li/Al-LDH), addressing a critical gap in the literature. The synthesized Li/Al-LDH was characterized by SEM, EDX, FTIR, XRD, TGA, and BET techniques, confirming its structural, morphological, and surface properties consistent with LDH materials. Li+ adsorption kinetics were evaluated using a pseudo-second-order model, and equilibrium capacities were determined. A novel modeling approach was developed by integrating pseudo-second-order kinetics into a computational fluid dynamics (CFD) framework based on the convection-diffusion and Darcy-Brinkman-Stokes (DBS) equations, enabling predictive simulation of reactive transport during Li recovery from brine, a capability not previously reported. The model showed strong agreement with both analytical flow solutions and experimental adsorption data. Maximum Li+ adsorption capacities of 12.765 mg/g at 25 °C and 18.5 mg/g at 45 °C were achieved. Notably, Li/Al-LDH demonstrated exceptional selectivity for Li+ over competing cations, with a Li+/Mg2+ separation factor reaching 143.47. This integrated experimental and modeling framework offers a promising pathway for optimizing Li extraction from brines, with implications for advancing selective sorbent design and process efficiency in industrial applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Petroleum Engineering, University of Houston, 5000 Gulf Freeway, Building 9, Houston, TX 77204, USA.
- Department of Petroleum Engineering, University of Houston, 5000 Gulf Freeway, Building 9, Houston, TX 77204, USA. Electronic address: kjlee6@central.uh.edu.
Förderung
- National Science foundation
- University of Houston
- National Science Foundation Division of Chemical Bioengineering Environmental and Transport Systems
Zitieren
APA
Mojid, M. R., You, J., & Lee, K. J. (2025). Experimental and reactive transport modeling study of direct lithium extraction From brines with Li/Al-layered double hydroxides. Journal of Contaminant Hydrology. https://doi.org/10.1016/j.jconhyd.2025.104693
Vancouver
Mojid MR, You J, Lee KJ. Experimental and reactive transport modeling study of direct lithium extraction From brines with Li/Al-layered double hydroxides. Journal of Contaminant Hydrology. 2025. doi:10.1016/j.jconhyd.2025.104693
BibTeX
@article{Mojid2025,
author = {Mojid, Muhammed Rashik and You, Jiahui and Lee, Kyung Jae},
title = {Experimental and reactive transport modeling study of direct lithium extraction From brines with Li/Al-layered double hydroxides},
journal = {Journal of Contaminant Hydrology},
year = {2025},
doi = {10.1016/j.jconhyd.2025.104693}
}
EUVIMED