EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Upcycling of pyrolytic char waste as a filler for circular asphalt pavement infrastructure

Chai Siah Lee, Lu Zhou, Anand Sreeram, Mohamed Adam, Ian Cardillo-Zallo, Edward Lester, Gordon Airey, Eleanor Binner, Derek Irvine

Journal of Cleaner Production · 2026-05 · 563 · 148395

DOI: 10.1016/j.jclepro.2026.148395 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Cleaner Production, 2026-05. Verfasst von Chai Siah Lee und 8 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Nottingham, Engineering and Physical Sciences Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Incorporating industrial waste into road pavements is a key strategy for advancing asphalt decarbonisation. This manuscript reports the first study into the potential use of a byproduct (defined as PMMA-char) from the industrial pyrolysis of commercial poly(methyl methacrylate) (PMMA) plastic as a sustainable alternative to conventional mineral fillers, namely limestone and hydrated lime, in the asphalt mastic part of an asphalt mixture. Physicochemical characterisation revealed that PMMA-char contained calcite, barium sulfate, and amorphous carbon, exhibiting mineralogical similarities to limestone, which supports its potential as a substitute filler. Various asphalt mastic combinations were prepared by replacing traditional fillers with PMMA-char from 0 to 100% levels, and their rheological properties were evaluated. The overall findings showed that the optimum PMMA-char replacement level depended on the rheological performance metric considered. For limestone-based mastics, the high-temperature Performance Grade (PG) critical temperature peaked at 25 – 50% replacement, while the fatigue life reached its maximum at 75% replacement. For hydrated lime-based mastics, a 25% replacement level enhanced the high-temperature mastic performance, whereas fatigue life decreased progressively with increasing PMMA-char content. These differences are likely due to variations in microstructure, void ratio, and specific surface area among the fillers, affecting the mastic's effective bitumen fraction. Given that PMMA-char is an industrial byproduct with low economic value, it offers significant promise as a viable low-carbon filler replacement for pavements when compared to current commercial mastic using traditional mineral fillers, which generate significant environmental impact, including high energy consumption, resource depletion, and associated CO 2 emissions.

Förderung

  • University of Nottingham
  • Engineering and Physical Sciences Research Council

Zitieren

APA

Lee, C. S., Zhou, L., Sreeram, A., Adam, M., Cardillo-Zallo, I., Lester, E., Airey, G., Binner, E., & Irvine, D. (2026). Upcycling of pyrolytic char waste as a filler for circular asphalt pavement infrastructure. Journal of Cleaner Production, 563, 148395. https://doi.org/10.1016/j.jclepro.2026.148395

Vancouver

Lee CS, Zhou L, Sreeram A, Adam M, Cardillo-Zallo I, Lester E, et al. Upcycling of pyrolytic char waste as a filler for circular asphalt pavement infrastructure. Journal of Cleaner Production. 2026;563:148395. doi:10.1016/j.jclepro.2026.148395

BibTeX
@article{Lee2026,
  author = {Lee, Chai Siah and Zhou, Lu and Sreeram, Anand and Adam, Mohamed and Cardillo-Zallo, Ian and Lester, Edward and Airey, Gordon and Binner, Eleanor and Irvine, Derek},
  title = {Upcycling of pyrolytic char waste as a filler for circular asphalt pavement infrastructure},
  journal = {Journal of Cleaner Production},
  year = {2026},
  volume = {563},
  pages = {148395},
  doi = {10.1016/j.jclepro.2026.148395}
}
Kostenlos starten →