EUVIMEDEUVIMED entdecken
Crossref

A three-dimensional interconnected molybdenum disulfide/multi-walled carbon nanotubes cathode with enlarged interlayer spacing for aqueous zinc-ion storage

Honglei Shuai, Renzhi Liu, Wenxuan Li, Xiaojian Yang, Hui Lu, Yongping Gao, Jing Xu, Kejing Huang

Journal of Colloid and Interface Science · 2023-06 · 639 · 292-301

DOI: 10.1016/j.jcis.2023.02.045 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Colloid and Interface Science, 2023-06. Verfasst von Honglei Shuai und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Science and Technology, Xinyang College, Xinyang 464000, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 50 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Layered molybdenum disulfide (MoS2) shows tremendous prospect as cathode material for aqueous zinc-ion batteries (AZIBs) due to the two-dimensional zinc ions (Zn2+) diffusion channels and tunable interlayer spacing. However, it is subjected to sluggish insertion/extraction kinetics, inferior electronic conductivity and inadequate active capacities. Herein, a three-dimensional (3D) interconnected MoS2/multi-walled carbon nanotubes (MWCNTs) framework is proposed to address these issues. Importantly, the MWCNTs cores offer interconnection routes for fast electrons and zinc ions transport, the expanded spacing of MoS2 interlayer with 1.05 nm can facilitate rapid Zn2+ intercalation/extraction, and the confined MoS2 layers in inner MWCNTs can mitigate the agglomeration and restacking of MoS2 nanosheets. Benefitting from the confined structural configuration, sufficient active surface and 3D structural stability, the MoS2/MWCNTs as AZIBs cathode delivers a large initial reversible capacity of 218.3 mAh/g and high coulombic efficiency of 78.2 % at 0.1 A/g. Additionally, the 3D interconnected cathode maintains nearly intact structure after a fierce galvanostatic charge/discharge process, resulting in large retained capacities of 126.3 mAh/g at 1 A/g after 650 cycles and 101.1 mAh/g at 3 A/g after 1000 cycles. This work offers a novel strategy for the structure design of two-dimensional materials to develop high-performance cathodes for AZIBs.

Schlagwörter

Stichwörter der Autor:innen

3D interconnected structureAqueous zinc-ion batteriesExpanded interlayer spacingHigh-performanceMoS(2)/MWCNTs cathodes

Autor:innen und Institutionen

  • School of Science and Technology, Xinyang College, Xinyang 464000, China.
  • College of Chemistry and Chemical Engineering, Xinyang Normal University, Xinyang 464000, China.
  • School of Chemistry and Chemical Engineering, Guangxi Minzu University; Key Laboratory of Chemistry and Engineering of Forest Products, State Ethnic Affairs Commission; Guangxi Key Laboratory of Chemistry and Engineerin…

Zitieren

APA

Shuai, H., Liu, R., Li, W., Yang, X., Lu, H., Gao, Y., Xu, J., & Huang, K. (2023). A three-dimensional interconnected molybdenum disulfide/multi-walled carbon nanotubes cathode with enlarged interlayer spacing for aqueous zinc-ion storage. Journal of Colloid and Interface Science, 639, 292-301. https://doi.org/10.1016/j.jcis.2023.02.045

Vancouver

Shuai H, Liu R, Li W, Yang X, Lu H, Gao Y, et al. A three-dimensional interconnected molybdenum disulfide/multi-walled carbon nanotubes cathode with enlarged interlayer spacing for aqueous zinc-ion storage. Journal of Colloid and Interface Science. 2023;639:292-301. doi:10.1016/j.jcis.2023.02.045

BibTeX
@article{Shuai2023,
  author = {Shuai, Honglei and Liu, Renzhi and Li, Wenxuan and Yang, Xiaojian and Lu, Hui and Gao, Yongping and Xu, Jing and Huang, Kejing},
  title = {A three-dimensional interconnected molybdenum disulfide/multi-walled carbon nanotubes cathode with enlarged interlayer spacing for aqueous zinc-ion storage},
  journal = {Journal of Colloid and Interface Science},
  year = {2023},
  volume = {639},
  pages = {292--301},
  doi = {10.1016/j.jcis.2023.02.045}
}
Kostenlos starten →