Development and characterization of reference environmentally relevant micro-nano-plastics for risk assessment studies
NanoImpact · 2025-04 · 38 · 100567
DOI: 10.1016/j.impact.2025.100567 ↗Kurz gefasst
Fachartikel in der Zeitschrift NanoImpact, 2025-04. Verfasst von Milton Das und 15 weiteren Autor:innen. Beteiligte Einrichtung: Nanoscience and Advanced Materials Center, Environmental and Occupational Health Sciences Institute, Rutgers University, 170 Frelinghuysen Road, Pisc…. Hauptthemen laut MEDLINE: Plastics, Environmental Pollutants. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIEHS NIH HHS, National Institute of Food and Agriculture, National Institutes of Health.
Abstract (Originalsprache)
Micro- and nano-plastics (MNPs) have become ubiquitous environmental pollutants. Extensive toxicological studies of MNPs have been conducted in recent years. However, because of the difficulties involved in extraction and collection of MNPs from environmental media, most of these studies have employed simplistic, pristine, spherical, micro- or nano-sized commercial MNPs, whose properties, including morphology, surface chemistry, and size, do not adequately approximate those of environmentally relevant MNPs. Here, we describe the development and use of methods for the synthesis of well characterized, environmentally relevant MNPs across the life cycle of a plastic material, in a property-controlled manner. Multiple degradation scenarios, including mechanical fragmentation (cryogenic milling), UV weathering, and thermal disintegration (incineration) were applied to virgin plastic materials (polyvinyl chloride, PVC; polyethylene terephthalate, PET; High density polyethylene, HDPE; Acrylonitrile butadiene styrene, ABS; polycarbonate, PC; and polypropylene, PP) to simulate the life cycle pathways that likely occur in the environment over time. The MNPs generated from these degradation processes were size fractionated using both "dry" and "wet" separation methods. Detailed physicochemical characterization of the size fractionated reference MNPs was performed to determine size, morphology, chemical and elemental compositions, and hydrophobicity. Microbiological sterility and endotoxin content of reference MNPs were also assessed. Protocols for storage of reference MNPs in controlled oxygen and moisture conditions for future use in toxicological studies are also described. The methodology developed in this study can be used to synthesize environmentally relevant reference MNPs across the life cycle of plastic materials for use in risk assessment studies.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Nanoscience and Advanced Materials Center, Environmental and Occupational Health Sciences Institute, Rutgers University, 170 Frelinghuysen Road, Piscataway, NJ 08854, United States.
- Particle and Technology Laboratory, Department of Mechanical Engineering, ETH Zürich, Sonneggstrasse 3, CH-8092 Zürich, Switzerland.
- The Connecticut Agricultural Experiment Station, New Haven, CT, United States.
- Department of Chemical & Biochemical Engineering, Rutgers University-New Brunswick, 98 Brett Rd, Piscataway, NJ 08854, United States.
- Department of Chemistry and Environmental Sciences, 161 Warren Street, New Jersey Institutes of Technology, University Heights, Newark, NJ 07102, United States.
- Nanoscience and Advanced Materials Center, Environmental and Occupational Health Sciences Institute, Rutgers University, 170 Frelinghuysen Road, Piscataway, NJ 08854, United States. Electronic address: philip.demokritou…
Förderung
- NIEHS NIH HHS
- National Institute of Food and Agriculture
- National Institutes of Health
- Consortium for Energy, Environment and Demilitarization
- National Institute of Environmental Health Sciences
Zitieren
APA
Das, M., Calderon, L., Singh, D., Majumder, S., Bazina, L., Vaze, N., Trivanovic, U., DeLoid, G., Zuverza-Mena, N., Kaur, M., Konkol, J., Tittikpina, N. K., Tsilomelekis, G., Sadik, O., White, J. C., & Demokritou, P. (2025). Development and characterization of reference environmentally relevant micro-nano-plastics for risk assessment studies. NanoImpact, 38, 100567. https://doi.org/10.1016/j.impact.2025.100567
Vancouver
Das M, Calderon L, Singh D, Majumder S, Bazina L, Vaze N, et al. Development and characterization of reference environmentally relevant micro-nano-plastics for risk assessment studies. NanoImpact. 2025;38:100567. doi:10.1016/j.impact.2025.100567
BibTeX
@article{Das2025,
author = {Das, Milton and Calderon, Leonardo and Singh, Dilpreet and Majumder, Satwik and Bazina, Lila and Vaze, Nachiket and Trivanovic, Una and DeLoid, Glen and Zuverza-Mena, Nubia and Kaur, Mandeep and Konkol, Jakub and Tittikpina, Nassifatou Koko and Tsilomelekis, George and Sadik, Omowunmi and White, Jason C and Demokritou, Philip},
title = {Development and characterization of reference environmentally relevant micro-nano-plastics for risk assessment studies},
journal = {NanoImpact},
year = {2025},
volume = {38},
pages = {100567},
doi = {10.1016/j.impact.2025.100567}
}
EUVIMED