The Facile and Efficient Fabrication of Rice Husk/poly (lactic acid) Foam Composites by Coordinated the Interface Combination and Bubble Hole Structure
International Journal of Biological Macromolecules · 2023
DOI: 10.1016/j.ijbiomac.2023.123734 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Biological Macromolecules, 2023. Verfasst von Jingmeng Sun und 8 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Wood Material Science and Application (Beijing Forestry University), Ministry of Education, Beijing 100083, China; Beijing Key Labo…. Hauptthemen laut MEDLINE: Oryza. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: Natural Science Foundation of Beijing Municipality, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
The possibility of agricultural-forestry waste (rice husks) and biodegradable plastics (poly(lactic acid)) being used to produce ecologically friendly foam composite was discussed in this work. The effects of different material parameters (the dosage of PLA-g-MAH, type and content of chemical foaming agent) on the microstructure and physical properties of composite were investigated. PLA-g-MAH promoted the chemical grafting between cellulose and PLA, and made the structure denser, thus improving the interface compatibility of the two phases and resulting in good thermal stability, high tensile strength (6.99 MPa) and bending strength (28.85 MPa) of composites. Furthermore, the properties of rice husk/PLA foam composite prepared by two kinds of foaming agents (endothermic and exothermic) were characterized. The addition of fiber limited the growth of pores, which provided better dimensional stability and narrower pore size distribution, made the interface of the composite bond tightly. And the bubble can prevent crack propagation and improve the mechanical properties of the composite. The bending strength and tensile strength of composite were 37.36 MPa and 25.32 MPa, which increased by 28.35 % and 23.27 %, respectively. Therefore, the composite prepared by using agricultural-forestry wastes and poly(lactic acid) possess acceptable mechanical properties, thermal stability and water resistance, expanding the scope of application.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Key Laboratory of Wood Material Science and Application (Beijing Forestry University), Ministry of Education, Beijing 100083, China; Beijing Key Laboratory of Wood Science and Engineering, Beijing Forestry University, B…
Förderung
- Natural Science Foundation of Beijing Municipality
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Sun, J., Zhao, Z., Pang, Y., Liu, J., Zhang, W., Wang, B., Xu, L., Guo, H., & Liu, Y. (2023). The Facile and Efficient Fabrication of Rice Husk/poly (lactic acid) Foam Composites by Coordinated the Interface Combination and Bubble Hole Structure. International Journal of Biological Macromolecules. https://doi.org/10.1016/j.ijbiomac.2023.123734
Vancouver
Sun J, Zhao Z, Pang Y, Liu J, Zhang W, Wang B, et al. The Facile and Efficient Fabrication of Rice Husk/poly (lactic acid) Foam Composites by Coordinated the Interface Combination and Bubble Hole Structure. International Journal of Biological Macromolecules. 2023. doi:10.1016/j.ijbiomac.2023.123734
BibTeX
@article{Sun2023,
author = {Sun, Jingmeng and Zhao, Zonglin and Pang, Yao and Liu, Jiaxun and Zhang, Weiye and Wang, Beibei and Xu, Liang and Guo, Hongwu and Liu, Yi},
title = {The Facile and Efficient Fabrication of Rice Husk/poly (lactic acid) Foam Composites by Coordinated the Interface Combination and Bubble Hole Structure},
journal = {International Journal of Biological Macromolecules},
year = {2023},
doi = {10.1016/j.ijbiomac.2023.123734}
}
EUVIMED