EUVIMEDEUVIMED entdecken
Crossref

Efficient removal of cyanobacterial harmful algal blooms through chitosan-clay flocculation: Effects of dosage and application procedure

Avery A Agles, Jo J Albrecht, Judy Q Yang

Harmful Algae · 2026-06 · 156 · 103124

DOI: 10.1016/j.hal.2026.103124 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Harmful Algae, 2026-06. Verfasst von Avery A Agles und 2 weiteren Autor:innen. Beteiligte Einrichtung: Saint Anthony Falls Laboratory, University of Minnesota, Twin Cities, 2 SE 3rd Ave, Minneapolis, MN 55414, USA; Department of Civil, Environmental, a…. Hauptthemen laut MEDLINE: Chitosan, Cyanobacteria, Aluminum Silicates, Harmful Algal Bloom. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: Legislative-Citizen Commission on Minnesota Resources, Environment and Natural Resources Trust Fund, National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cyanobacterial harmful algae blooms (cyanoHABs) are increasingly common in freshwater around the world, impairing freshwater ecosystems as well as access to water used for drinking, agriculture, fishing, and industry. A combined coagulant-clay flocculation strategy is a promising method to remove harmful algal cells, yet the optimally efficient application protocol and dosage remain unclear, making cost estimation difficult. Here we investigate how (1) the application procedure and (2) the relative dosages of clay and chitosan affect the removal efficiency of M. aeruginosa, a representative freshwater cyanobacterium. Bentonite was chosen for its abundance and high cation exchange capacity, and chitosan was chosen for its biodegradability and regulatory approval in the United States. We conducted lab-scale flocculation experiments that showed (i) a stepwise application of chitosan and bentonite, regardless of application order, results in a higher cell removal efficiency than a single-step chitosan-modified bentonite application (CMB); (ii) in all three approaches, there is an optimal chitosan dose that is sensitive to both cyanobacterial cell density and the bentonite dose; and (iii) upon optimization according to application procedure and dosage, the addition of chitosan at 2-4 mg/L can reduce the required bentonite dose to remove 80 % of cyanobacteria to

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ChitosanCyanobacteriaAluminum SilicatesHarmful Algal BloomWater PurificationFlocculationBentoniteClay

Stichwörter der Autor:innen

BentoniteChitosanClayCoagulantCyanoHABFlocculation

Substanzen

ChitosanBentoniteClayAluminum Silicates

Autor:innen und Institutionen

  • Saint Anthony Falls Laboratory, University of Minnesota, Twin Cities, 2 SE 3rd Ave, Minneapolis, MN 55414, USA; Department of Civil, Environmental, and Geo-Engineering, University of Minnesota, Twin Cities, 790 Civil En…
  • Department of Civil, Environmental, and Geo-Engineering, University of Minnesota, Twin Cities, 790 Civil Engineering Bldg, 122, 500 Pillsbury Dr SE, Minneapolis, MN 55455, USA.

Förderung

  • Legislative-Citizen Commission on Minnesota Resources
  • Environment and Natural Resources Trust Fund
  • National Science Foundation

Zitieren

APA

Agles, A. A., Albrecht, J. J., & Yang, J. Q. (2026). Efficient removal of cyanobacterial harmful algal blooms through chitosan-clay flocculation: Effects of dosage and application procedure. Harmful Algae, 156, 103124. https://doi.org/10.1016/j.hal.2026.103124

Vancouver

Agles AA, Albrecht JJ, Yang JQ. Efficient removal of cyanobacterial harmful algal blooms through chitosan-clay flocculation: Effects of dosage and application procedure. Harmful Algae. 2026;156:103124. doi:10.1016/j.hal.2026.103124

BibTeX
@article{Agles2026,
  author = {Agles, Avery A and Albrecht, Jo J and Yang, Judy Q},
  title = {Efficient removal of cyanobacterial harmful algal blooms through chitosan-clay flocculation: Effects of dosage and application procedure},
  journal = {Harmful Algae},
  year = {2026},
  volume = {156},
  pages = {103124},
  doi = {10.1016/j.hal.2026.103124}
}
Kostenlos starten →