EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Role of surface morphology in bed particle layer formation on quartz bed particles in fluidized bed combustion of woody biomass

Ali Valizadeh, Nils Skoglund, Fredrik Forsberg, Henrik Lycksam, Marcus Öhman

Fuel · 2024-02 · 357 · 129702

DOI: 10.1016/j.fuel.2023.129702 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fuel, 2024-02. Verfasst von Ali Valizadeh und 4 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Energimyndigheten.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of quartz bed particle surface morphology on the bed particle layer and crack layer formation process in fluidized bed combustion of woody biomass was investigated in this work. Bed material samples were collected at different sampling times from the startup with a fresh bed in industrial scale bubbling fluidized bed (BFB) and circulating fluidized bed (CFB) boilers, both utilizing woody biomass. X-ray microtomography (XMT) and scanning electron microscopy coupled with energy dispersive spectroscopy (SEM/EDS) were employed to characterize bed particle layers and crack layers in the samples. Results showed that there is a noticeable difference between the bed layer characteristics over the so-called “ concave ” and “ convex ” -shaped morphologies on the bed particle surface with respect to layer formation. The concave areas are mainly covered with a thin inner layer, whilst the convex display a comparably thick inner layer and an outer layer. In addition, 3D images of the particles revealed that the crack layers mainly originate from concave areas where the particle is less protected by an outer bed particle layer in conjunction with cracks in the inner layer.

Förderung

  • Energimyndigheten

Zitieren

APA

Valizadeh, A., Skoglund, N., Forsberg, F., Lycksam, H., & Öhman, M. (2024). Role of surface morphology in bed particle layer formation on quartz bed particles in fluidized bed combustion of woody biomass. Fuel, 357, 129702. https://doi.org/10.1016/j.fuel.2023.129702

Vancouver

Valizadeh A, Skoglund N, Forsberg F, Lycksam H, Öhman M. Role of surface morphology in bed particle layer formation on quartz bed particles in fluidized bed combustion of woody biomass. Fuel. 2024;357:129702. doi:10.1016/j.fuel.2023.129702

BibTeX
@article{Valizadeh2024,
  author = {Valizadeh, Ali and Skoglund, Nils and Forsberg, Fredrik and Lycksam, Henrik and Öhman, Marcus},
  title = {Role of surface morphology in bed particle layer formation on quartz bed particles in fluidized bed combustion of woody biomass},
  journal = {Fuel},
  year = {2024},
  volume = {357},
  pages = {129702},
  doi = {10.1016/j.fuel.2023.129702}
}
Kostenlos starten →