EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Testing a coated PE-based mono-material for food packaging applications: an in-depth performance comparison with conventional multi-layer configurations

Daniele Carullo, Andrea Casson, Cesare Rovera, Masoud Ghaani, Tommaso Bellesia, Riccardo Guidetti, Stefano Farris

Food Packaging and Shelf Life · 2023-11 · 39 · 101143

DOI: 10.1016/j.fpsl.2023.101143 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Food Packaging and Shelf Life, 2023-11. Verfasst von Daniele Carullo und 6 weiteren Autor:innen. Die Arbeit wurde bisher 49-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Research and Innovation, European Commission, Faculty of Science and Engineering, University of Manchester.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A polyethylene (PE)-based mono-material was considered as an alternative to multi-layer configurations widely used within food packaging sector. An in-depth characterization was performed and several properties (optical, gas/vapor-barrier, and mechanical) tested for the mono-material and selected multi-layer films. The mono-material showed an outstanding performance concerning oxygen (0.18 ± 0.01 ∙ 10−6 mol m−2 s−1) and water vapor (2.84 ± 0.22 ∙ 10−5 g m−2 s−1) barrier properties, which were ascribed to a thin oxygen barrier coating and the inherent PE hydrophobicity, respectively. The coating also provided excellent UV-C shielding ability, tensile/puncture resistance, and friction properties comparable to those of multi-layer systems. The environmental performance of the materials assessed via LCA showed that the mono-material represented the configuration with the lowest environmental profile. This preliminary work highlighted the potential of PE-based mono-materials functionalized via coating technology as an alternative to multi-layer configurations, thus embracing the increasing demand for more environmentally sustainable solutions (100 % recyclable).

Förderung

  • European Union's Research and Innovation
  • European Commission
  • Faculty of Science and Engineering, University of Manchester

Zitieren

APA

Carullo, D., Casson, A., Rovera, C., Ghaani, M., Bellesia, T., Guidetti, R., & Farris, S. (2023). Testing a coated PE-based mono-material for food packaging applications: an in-depth performance comparison with conventional multi-layer configurations. Food Packaging and Shelf Life, 39, 101143. https://doi.org/10.1016/j.fpsl.2023.101143

Vancouver

Carullo D, Casson A, Rovera C, Ghaani M, Bellesia T, Guidetti R, et al. Testing a coated PE-based mono-material for food packaging applications: an in-depth performance comparison with conventional multi-layer configurations. Food Packaging and Shelf Life. 2023;39:101143. doi:10.1016/j.fpsl.2023.101143

BibTeX
@article{Carullo2023,
  author = {Carullo, Daniele and Casson, Andrea and Rovera, Cesare and Ghaani, Masoud and Bellesia, Tommaso and Guidetti, Riccardo and Farris, Stefano},
  title = {Testing a coated PE-based mono-material for food packaging applications: an in-depth performance comparison with conventional multi-layer configurations},
  journal = {Food Packaging and Shelf Life},
  year = {2023},
  volume = {39},
  pages = {101143},
  doi = {10.1016/j.fpsl.2023.101143}
}
Kostenlos starten →