EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of fresh filled pasta shape on apparent heat transfer coefficient and equivalent Pasteurization Value (F70) during Steam-Injection Thermal Processing

Stefano Zardetto, Michele Fregonese, Gabriella Pasini

Food and Bioproducts Processing · 2026-11

DOI: 10.1016/j.fbp.2026.11.008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Food and Bioproducts Processing, 2026-11. Verfasst von Stefano Zardetto und 2 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Steam injection is widely used to pasteurize fresh filled pasta, ensuring microbial safety and extending shelf life. This study investigated heat transfer behavior and the equivalent pasteurization value (F₇₀/₁₀) during steam-injection processing of different filled-pasta shapes. A traditional raviolo was compared with two alternative shapes, girasole and mezzaluna , characterized by higher filling content and larger volume-to-surface-area (V/A) ratios, to evaluate the combined effects of steam flow rate and product geometry on heat penetration at the coldest point. Heat transfer coefficients (h) ranged from 121 to 221 W m⁻² °C⁻¹ for girasole and mezzaluna , and from 765 to 1150 W m⁻² °C⁻¹ for raviolo , increasing with steam flow rate. For shapes characterized by higher filling contents and larger V/A ratios, attainment of the target F₇₀/₁₀ value strongly depended on the amount of steam supplied to the processing chamber. Although chamber temperature increased with steam flow rate, it remained constant above 280 kg h⁻¹, whereas the F₇₀/₁₀ value continued to increase at the product core. Model predictions showed excellent agreement with experimental data (r 2 >0.98) using simplified infinite-slab geometry. The results demonstrate that chamber temperature alone is not a sufficient critical control parameter for the pasteurization of large, filled pasta shapes. Effective process control requires regulation of steam supply to ensure microbial safety and optimize industrial pasteurization performance.

Zitieren

APA

Zardetto, S., Fregonese, M., & Pasini, G. (2026). Effect of fresh filled pasta shape on apparent heat transfer coefficient and equivalent Pasteurization Value (F70) during Steam-Injection Thermal Processing. Food and Bioproducts Processing. https://doi.org/10.1016/j.fbp.2026.11.008

Vancouver

Zardetto S, Fregonese M, Pasini G. Effect of fresh filled pasta shape on apparent heat transfer coefficient and equivalent Pasteurization Value (F70) during Steam-Injection Thermal Processing. Food and Bioproducts Processing. 2026. doi:10.1016/j.fbp.2026.11.008

BibTeX
@article{Zardetto2026,
  author = {Zardetto, Stefano and Fregonese, Michele and Pasini, Gabriella},
  title = {Effect of fresh filled pasta shape on apparent heat transfer coefficient and equivalent Pasteurization Value (F70) during Steam-Injection Thermal Processing},
  journal = {Food and Bioproducts Processing},
  year = {2026},
  doi = {10.1016/j.fbp.2026.11.008}
}
Kostenlos starten →