EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Innovative Tin and hard carbon architecture for enhanced stability in lithium-ion battery anodes

Rana Faisal Shahzad, Shahid Rasul, Mohamed Mamlouk, Cecil Cherian Lukose, Rana Abdul Shakoor, Abdul Wasy Zia

Journal of Energy Storage · 2024-10 · 100 · 113671

DOI: 10.1016/j.est.2024.113671 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Energy Storage, 2024-10. Verfasst von Rana Faisal Shahzad und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Newcastle University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tin (Sn), with a theoretical capacity of 994 mAh g-1, is a promising anode material for lithium-ion batteries (LIBs). However, fundamental limitations like large volume expansion during charge-discharge cycle and confined electronic conductivity limit its practical utility. Here, we report a new material design and manufacturing method of LIB anodes using Sn and Hard Carbon (HC) architecture, which is produced by Physical Vapor Deposition (PVD). A bilayer HC/Sn anode structure is deposited on a carbon/copper sheet as a function of deposition time, temperature, and substrate heat treatment. The developed anodes are used to make cells with a lithium-ion electrolyte using a specific fabrication process. The morphology, atomic structure, conductivity, and electrochemical performance of the developed HC/Sn anodes are studied with SEM, TEM, XPS, and electro-chemical techniques. At a discharge rate of 0.1C, the Sn heated + HC anode performs exceptionally well, offering a capacity of 763 mAh g-1. It is noteworthy that it achieves a capacity of 342 mAh g-1 when fast charging at 5C, demonstrating exceptional rate capability. The Sn heated + HC anode maintains > 97 % Coulombic efficiency of its capacity after 3000 cycles at a rate of 0.1C after 3000 cycles 730.5 mAh g-1 recorded, demonstrating an impressive cycle life. The novel material design approach of the Sn heated + HC anode, which has a multi-layered structure and HC acting as a barrier against volumetric expansion and improving electronic conductivity during battery cycling, is perceived as influential in uplifting anode ’ s performance.

Förderung

  • Newcastle University

Zitieren

APA

Shahzad, R. F., Rasul, S., Mamlouk, M., Lukose, C. C., Shakoor, R. A., & Zia, A. W. (2024). Innovative Tin and hard carbon architecture for enhanced stability in lithium-ion battery anodes. Journal of Energy Storage, 100, 113671. https://doi.org/10.1016/j.est.2024.113671

Vancouver

Shahzad RF, Rasul S, Mamlouk M, Lukose CC, Shakoor RA, Zia AW. Innovative Tin and hard carbon architecture for enhanced stability in lithium-ion battery anodes. Journal of Energy Storage. 2024;100:113671. doi:10.1016/j.est.2024.113671

BibTeX
@article{Shahzad2024,
  author = {Shahzad, Rana Faisal and Rasul, Shahid and Mamlouk, Mohamed and Lukose, Cecil Cherian and Shakoor, Rana Abdul and Zia, Abdul Wasy},
  title = {Innovative Tin and hard carbon architecture for enhanced stability in lithium-ion battery anodes},
  journal = {Journal of Energy Storage},
  year = {2024},
  volume = {100},
  pages = {113671},
  doi = {10.1016/j.est.2024.113671}
}
Kostenlos starten →