Phase-change photothermal foam enables continuous hypersaline brine desalination
Environmental Science and Ecotechnology · 2026-05 · 31 · 100696
DOI: 10.1016/j.ese.2026.100696 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Science and Ecotechnology, 2026-05. Verfasst von Peilei Zhou und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Marine Chemistry Theory and Technology, Ministry of Education, College of Chemistry and Chemical Engineering, Ocean University of C…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shandong Province.
Abstract (Originalsprache)
Seawater desalination is critical for mitigating global freshwater scarcity, yet the discharge of high-salinity brine causes severe ecological and economic issues. Solar-driven interfacial evaporation provides an energy-efficient method for achieving zero liquid discharge and effective brine concentration. To manage the inherent intermittency of natural sunlight, phase change materials are increasingly integrated to store excess thermal energy for continuous evaporation. Nevertheless, current systems are limited by elevated phase-transition temperatures, liquid leakage, and substantial performance degradation in hypersaline conditions. Here we show a multifunctional composite foam that unifies broadband photothermal conversion with low-temperature phase-change thermal regulation for sustained hypersaline desalination. By confining dodecylamine within a polypyrrole-coated chitosan-phenolic network, our material achieves a 95% solar absorption efficiency and a phase-change energy storage capacity of 208.4 J g −1 . The evaporator achieves a stable evaporation rate of 1.862 kg m −2 h −1 under one sun and maintains 0.684 kg m −2 h −1 in the absence of light. It also sustains a high evaporation rate of 1.763 kg m −2 h −1 in 20 wt% NaCl without salt accumulation and produces 9.229 kg m −2 of purified freshwater over 10 hours of outdoor solar operation. These findings provide a scalable and continuous approach to solar-driven brine reduction, advancing sustainable resource recovery and all-weather water purification. • A chitosan-phenolic network achieves 95% solar absorption for efficient photothermal evaporation. • Low-temperature dodecylamine enables continuous dark evaporation at 0.684 kg m −2 h −1 . • The structurally stable foam maintains 1.763 kg m −2 h −1 evaporation in 20 wt% NaCl brine. • Outdoor tests yielded 9.229 kg m −2 of freshwater in 10 hours while removing heavy metals.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Marine Chemistry Theory and Technology, Ministry of Education, College of Chemistry and Chemical Engineering, Ocean University of China, Qingdao, Shandong, 266100, China.
- School of Materials Science and Engineering, Ocean University of China, Qingdao, Shandong, 266100, China.
- School of Life Sciences, Huzhou University, Huzhou, Zhejiang, 313000, China.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Shandong Province
Zitieren
APA
Zhou, P., Sun, F., Xu, L., Liu, Q., & Xu, J. (2026). Phase-change photothermal foam enables continuous hypersaline brine desalination. Environmental Science and Ecotechnology, 31, 100696. https://doi.org/10.1016/j.ese.2026.100696
Vancouver
Zhou P, Sun F, Xu L, Liu Q, Xu J. Phase-change photothermal foam enables continuous hypersaline brine desalination. Environmental Science and Ecotechnology. 2026;31:100696. doi:10.1016/j.ese.2026.100696
BibTeX
@article{Zhou2026,
author = {Zhou, Peilei and Sun, Feng and Xu, Lishan and Liu, Qingshan and Xu, Jia},
title = {Phase-change photothermal foam enables continuous hypersaline brine desalination},
journal = {Environmental Science and Ecotechnology},
year = {2026},
volume = {31},
pages = {100696},
doi = {10.1016/j.ese.2026.100696}
}
EUVIMED