Engineering affinity tag strategies for selective downstream processing of H2O2-generating oxidases: Minimizing catalase contamination via CBM-based platforms
Enzyme and Microbial Technology · 2027-01 · 202 · 110960
DOI: 10.1016/j.enzmictec.2026.110960 ↗Kurz gefasst
Fachartikel in der Zeitschrift Enzyme and Microbial Technology, 2027-01. Verfasst von Yerko Fredes und 7 weiteren Autor:innen. Beteiligte Einrichtung: Bioprocess Engineering and Applied Biocatalysis Group, Department of Chemical, Biological and Environmental Engineering, Universitat Autònoma de Barc…. Hauptthemen laut MEDLINE: Hydrogen Peroxide, Catalase, Oxidoreductases. Die Arbeit nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Autonomous University of Barcelona, European Regional Development Fund, Horizon 2020.
Abstract (Originalsprache)
Hydrogen peroxide (H2O2) is a key green oxidant for industrial biotransformations, yet its conventional production, storage, and handling present significant safety, logistical, and sustainability challenges. Enzymatic in situ generation using oxidases has emerged as an attractive alternative, enabling controlled H2O2 supply, eliminating transport requirements, and improved process integration. However, co-purified catalase from microbial expression hosts remains a major bottleneck, as it rapidly decomposes H2O2 and severely compromises process efficiency. This work demonstrates an affinity-driven downstream processing strategy to selectively minimize catalase contamination and enhance the performance of H2O2-generating biocatalysts. The bacterial oxidase N-acetylglucosamine oxidase (NagOX) was used as a model enzyme and genetically fused to different affinity tags, including His6-tag and carbohydrate-binding modules (CBM3 and CBM9). Their impacts on enzyme production, purification, stability, and immobilization were systematically evaluated from a bioprocess engineering perspective. While conventional His6-tag-based IMAC purification resulted in substantial residual catalase activity, the CBM3 affinity platform enabled selective adsorption onto inexpensive cellulose supports, achieving minimized contamination, with no detectable catalase activity under the assay conditions used in a single step. This approach provided a threefold higher purification factor (11.7 vs 4.0) and increased apparent oxidative activity by 42%, by eliminating competing side reactions. In contrast, CBM9 fusion led to structural instability and proteolytic degradation. Importantly, the CBM3-based strategy integrates purification, immobilization, and catalyst recovery into a single, scalable downstream operation using low-cost materials. The resulting biocatalyst exhibited enhanced performance for in situ H2O2 generation, highlighting the potential of affinity tag engineering for efficient and industrially relevant oxidase-based bioprocesses.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Bioprocess Engineering and Applied Biocatalysis Group, Department of Chemical, Biological and Environmental Engineering, Universitat Autònoma de Barcelona, Bellaterra, 08193, Spain.
- Molecular Enzymology, Groningen Biomolecular Sciences and Biotechnology Institute, University of Groningen, Groningen, 9747AG, the Netherlands.
- Bioprocess Engineering and Applied Biocatalysis Group, Department of Chemical, Biological and Environmental Engineering, Universitat Autònoma de Barcelona, Bellaterra, 08193, Spain. Electronic address: marina.guillen@ua…
Förderung
- Autonomous University of Barcelona
- European Regional Development Fund
- Horizon 2020
- State Agency of Research
- Government of Catalonia Agency for the Administration of University and Research Grants
- Spain Ministry of Science Innovation and Universities
- Generalitat de Catalunya
- Horizon 2020 Framework Programme
Zitieren
APA
Fredes, Y., Dimitri, I., Guerra, G., Casablancas, A., Santema, L. L., Fraaije, M., Romero, O., & Guillén, M. (2027). Engineering affinity tag strategies for selective downstream processing of H2O2-generating oxidases: Minimizing catalase contamination via CBM-based platforms. Enzyme and Microbial Technology, 202, 110960. https://doi.org/10.1016/j.enzmictec.2026.110960
Vancouver
Fredes Y, Dimitri I, Guerra G, Casablancas A, Santema LL, Fraaije M, et al. Engineering affinity tag strategies for selective downstream processing of H2O2-generating oxidases: Minimizing catalase contamination via CBM-based platforms. Enzyme and Microbial Technology. 2027;202:110960. doi:10.1016/j.enzmictec.2026.110960
BibTeX
@article{Fredes2027,
author = {Fredes, Yerko and Dimitri, Ivan and Guerra, Gerard and Casablancas, Antoni and Santema, Lars L and Fraaije, Marco and Romero, Oscar and Guillén, Marina},
title = {Engineering affinity tag strategies for selective downstream processing of H2O2-generating oxidases: Minimizing catalase contamination via CBM-based platforms},
journal = {Enzyme and Microbial Technology},
year = {2027},
volume = {202},
pages = {110960},
doi = {10.1016/j.enzmictec.2026.110960}
}
EUVIMED