Insights into the mechanism and chloride immobilization of seawater-mixed alkali-activated materials
Environmental Research · 2026-11 · 126196
DOI: 10.1016/j.envres.2026.126196 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Environmental Research, 2026-11. Verfasst von Yunhong Tang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Faculty of Engineering, Universiti Malaya, 50603 Kuala Lumpur, Malaysia. Die Arbeit nennt 177 Literaturangaben.
Abstract (Originalsprache)
Freshwater scarcity and the carbon intensity of cement production represent two major environmental challenges. Seawater-mixed alkali-activated materials (AAMs), incorporating industrial and agricultural by-products, offer opportunities to reduce reliance on freshwater and cement. However, seawater cannot be regarded as an inert substitute for freshwater because its multi-ionic composition fundamentally alters alkali activation. This review examines the competing mechanisms arising from interactions among seawater, precursors, and alkali activators, with emphasis on differences in reaction kinetics, phase evolution, and chloride immobilization between high- and low-calcium AAMs. Competing mechanisms are primarily governed by precursor, ion concentrations, and activator chemistry. In high-calcium AAMs, chloride can promote calcium dissolution and accelerate early reactions, but its accelerating effect is concentration-dependent and might be counteracted by Mg-induced alkalinity reduction and premature precipitation. In contrast, low-calcium AAMs lack a Ca-driven acceleration mechanism and rely mainly on aluminosilicate dissolution, which might make them potentially more susceptible to Mg-induced alkalinity reduction. In addition, High-calcium AAMs favor C-A-S-H gels and chloride-bearing phases such as Friedel's salt and layered double hydroxides, whereas low-calcium AAMs are dominated by N-A-S-H gels, with potential zeolitic transformations. Chloride immobilization occurs through both chemical binding and physical adsorption. Notably, higher calcium content does not necessarily ensure superior chloride-binding capacity, highlighting the importance of reactive amorphous phase ratios rather than precursor type alone. Understanding these coupled mechanisms is essential for designing seawater-compatible AAMs that support freshwater-saving and low-carbon construction.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Civil Engineering, Faculty of Engineering, Universiti Malaya, 50603 Kuala Lumpur, Malaysia.
- Research Centre for Carbon Dioxide Capture and Utilisation (CCDCU), Faculty of Engineering and Technology, Sunway University, No. 5, Jalan Universiti, Bandar Sunway 47500, Selangor Darul Ehsan, Malaysia. Electronic addr…
- Key Laboratory for Green & Advanced Civil Engineering Materials and Application Technology of Hunan Province, College of Civil Engineering, Hunan University, Changsha 410082, China.
Zitieren
APA
Tang, Y., Mo, K. H., Zhang, H., Wang, L., Tan, Z., & Luo, Y. (2026). Insights into the mechanism and chloride immobilization of seawater-mixed alkali-activated materials. Environmental Research, 126196. https://doi.org/10.1016/j.envres.2026.126196
Vancouver
Tang Y, Mo KH, Zhang H, Wang L, Tan Z, Luo Y. Insights into the mechanism and chloride immobilization of seawater-mixed alkali-activated materials. Environmental Research. 2026:126196. doi:10.1016/j.envres.2026.126196
BibTeX
@article{Tang2026,
author = {Tang, Yunhong and Mo, Kim Hung and Zhang, Henglong and Wang, Lei and Tan, Zhenyu and Luo, Yao},
title = {Insights into the mechanism and chloride immobilization of seawater-mixed alkali-activated materials},
journal = {Environmental Research},
year = {2026},
pages = {126196},
doi = {10.1016/j.envres.2026.126196}
}
EUVIMED