EUVIMEDEUVIMED entdecken
Crossref

A new nanoporous alucone-amine hybrid membrane with extremely high CO2/CH4 selectivity

Aynaz Meshkat, Abbas Ali Khodadadi, Yadollah Mortazavi, Muhammad Sahimi

Environmental Research · 2026-09 · 306 · 125372

DOI: 10.1016/j.envres.2026.125372 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Research, 2026-09. Verfasst von Aynaz Meshkat und 3 weiteren Autor:innen. Beteiligte Einrichtung: Catalysis and Nanostructured Materials Research Laboratory, School of Chemical Engineering, College of Engineering, University of Tehran, P. O. Box 1…. Hauptthemen laut MEDLINE: Carbon Dioxide, Membranes, Artificial, Amines, Methane. Die Arbeit nennt 85 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fabricating membranes that can remove CO2 from a gaseous mixture has eluded scientists for a long time. The problem is highly important in view of global warming, with CO2 being the main culprit. Novel alucone-amine hybrid (AAH) membranes with extremely high selectivity of CO2 from its mixture with CH4 were fabricated using 1,6 hexane diamine (HDA) and triethyl aluminum (TEA). This was accomplished by, first, engineering the mesopores of a porous support alumina disk to small and uniform nanopores by boehmite sol spin coatings and, then, functionalizing the membranes with an alucone-amine hybrid. To obtain the optimal morphology, the number of boehmite sol coatings and the ratio of HDA to TEA were varied. The optimal morphology was fabricated with fifteen cycles of boehmite sol spin coating and HDA/TEA ratio of 2. The morphology of the resulting optimal membranes, their surface area, and pore-size distribution were characterized by several complementary techniques. Multiple analytical techniques confirmed probably two structures of hexagonal and tetragonal for the fabricated AAH, although its XRD pattern is absent from the HighScore Xpert reference library. The functional membranes have a nanoflake morphology, with their CO2 permeance being 7.72 × 10 -6 mol. m-2. S-1. Pa-1, CO2 selectivity of 2.85 × 105 and 48-days stability. To further test the alucone-amine powder, sorption measurements were carried out. AAH exhibited an exceptionally high CO2 adsorption capacity of 57.8 mmol g-1, while showing only a minor amount of CH4 adsorption, resulting in extremely high CO2/CH4 selectivity.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Carbon DioxideMembranes, ArtificialAminesMethaneNanoporesPorosityAluminum OxideAdsorption

Stichwörter der Autor:innen

Alucone-amine hybridExtremely high CO(2)/CH(4) selectivityFunctionalizationMembranePore size engineering

Substanzen

Carbon DioxideMembranes, ArtificialAminesMethaneAluminum Oxide

Autor:innen und Institutionen

  • Catalysis and Nanostructured Materials Research Laboratory, School of Chemical Engineering, College of Engineering, University of Tehran, P. O. Box 11155-4563, Tehran, Iran.
  • Catalysis and Nanostructured Materials Research Laboratory, School of Chemical Engineering, College of Engineering, University of Tehran, P. O. Box 11155-4563, Tehran, Iran. Electronic address: khodadad@ut.ac.ir.
  • Mork Family Department of Chemical Engineering and Material Science, University of Southern California, Los Angeles, CA, 90089-1211, USA.

Zitieren

APA

Meshkat, A., Khodadadi, A. A., Mortazavi, Y., & Sahimi, M. (2026). A new nanoporous alucone-amine hybrid membrane with extremely high CO2/CH4 selectivity. Environmental Research, 306, 125372. https://doi.org/10.1016/j.envres.2026.125372

Vancouver

Meshkat A, Khodadadi AA, Mortazavi Y, Sahimi M. A new nanoporous alucone-amine hybrid membrane with extremely high CO2/CH4 selectivity. Environmental Research. 2026;306:125372. doi:10.1016/j.envres.2026.125372

BibTeX
@article{Meshkat2026,
  author = {Meshkat, Aynaz and Khodadadi, Abbas Ali and Mortazavi, Yadollah and Sahimi, Muhammad},
  title = {A new nanoporous alucone-amine hybrid membrane with extremely high CO2/CH4 selectivity},
  journal = {Environmental Research},
  year = {2026},
  volume = {306},
  pages = {125372},
  doi = {10.1016/j.envres.2026.125372}
}
Kostenlos starten →