EUVIMEDEUVIMED entdecken
Crossref

Preparation and performance study of superhydrophobic/superoleophilic stainless steel-based SiO2/PDMS/FEVE separation mesh

Mingxun Yao, Jingguo Fu, Deshi Shen, Jianchao Tian, Yuchao Yang, Chunsheng Ma

Environmental Research · 2026-09 · 306 · 125182

DOI: 10.1016/j.envres.2026.125182 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Research, 2026-09. Verfasst von Mingxun Yao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Marine Engineering College, Dalian Maritime University, Dalian, 116026, China. Hauptthemen laut MEDLINE: Stainless Steel, Silicon Dioxide, Dimethylpolysiloxanes, Petroleum Pollution. Die Arbeit nennt 28 Literaturangaben. Gefördert von: Dalian Maritime University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To achieve the rapid recovery of spilled oil and high-efficiency oil-water separation in marine oil spill accidents, a one-step spraying method was adopted in this study. The blend of KH570-modified nano-SiO2 particles and polydimethylsiloxane/fluorocarbon resin (PDMS/FEVE) was sprayed onto a 304 stainless steel mesh to fabricate a high-durability oil-water separation mesh. The surface morphology and composition of the as-prepared separation mesh were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and Raman spectroscopy. The oil-water separation efficiency, permeation flux and cyclic stability of the mesh were tested via a self-assembled oil-water separation experimental device. The durability of the separation mesh was further evaluated by weight-loaded friction test, tape-peeling treatment and saline immersion test. The results show that the water contact angle of the fabricated Stainless Steel-based oil-water separation mesh reaches 162°, enabling rapid separation of oil-water mixtures with different viscosities. The separation efficiencies for diesel/water, lubricating oil/water, and hydraulic oil/water mixtures are 99.82%, 99.34% and 99.39%, respectively, while the corresponding permeation fluxes are 43.56 × 103 L/(m2·h), 3.52 × 103 L/(m2·h) and 3.92 × 103 L/(m2·h). After incorporating FEVE into the coating, the separation cycles for both diesel/deionized water mixtures and diesel/seawater mixtures is obviously elevated. The results of saline immersion tests, weight-loaded friction tests and tape-peeling tests demonstrate that the incorporation of FEVE optimizes coating retention capacity and strengthens the interfacial bonding strength among SiO2 nanoparticles, polymeric binder and stainless steel substrate. The enhanced performance of the stainless steel-based oil-water separation mesh is mainly attributed to the improvement of superhydrophobic/superoleophilic properties on the mesh surface induced by modified nano-SiO2 particles, as well as the enhanced bonding strength of nanoparticles on the metal mesh substrate provided by fluorocarbon resin.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Stainless SteelSilicon DioxideDimethylpolysiloxanesPetroleum PollutionHydrophobic and Hydrophilic InteractionsPhase SeparationMicroscopy, Electron, Scanning

Stichwörter der Autor:innen

Mechanical durabilityOil-water separationSeparation efficiencySuperhydrophobic mesh

Substanzen

Stainless SteelSilicon DioxideDimethylpolysiloxanesbaysilon

Autor:innen und Institutionen

  • Marine Engineering College, Dalian Maritime University, Dalian, 116026, China.
  • Marine Engineering College, Dalian Maritime University, Dalian, 116026, China. Electronic address: fjingguo@dlmu.edu.cn.

Förderung

  • Dalian Maritime University

Zitieren

APA

Yao, M., Fu, J., Shen, D., Tian, J., Yang, Y., & Ma, C. (2026). Preparation and performance study of superhydrophobic/superoleophilic stainless steel-based SiO2/PDMS/FEVE separation mesh. Environmental Research, 306, 125182. https://doi.org/10.1016/j.envres.2026.125182

Vancouver

Yao M, Fu J, Shen D, Tian J, Yang Y, Ma C. Preparation and performance study of superhydrophobic/superoleophilic stainless steel-based SiO2/PDMS/FEVE separation mesh. Environmental Research. 2026;306:125182. doi:10.1016/j.envres.2026.125182

BibTeX
@article{Yao2026,
  author = {Yao, Mingxun and Fu, Jingguo and Shen, Deshi and Tian, Jianchao and Yang, Yuchao and Ma, Chunsheng},
  title = {Preparation and performance study of superhydrophobic/superoleophilic stainless steel-based SiO2/PDMS/FEVE separation mesh},
  journal = {Environmental Research},
  year = {2026},
  volume = {306},
  pages = {125182},
  doi = {10.1016/j.envres.2026.125182}
}
Kostenlos starten →