Feasibility study on developing alkali-activated cementitious materials via calcination-induced structural reconstruction of carbide slag and illite
Environmental Research · 2026-09 · 305 · 124991
DOI: 10.1016/j.envres.2026.124991 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Research, 2026-09. Verfasst von Yingli Gao und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Transportation, Changsha University of Science & Technology, Changsha, 410114, China. Hauptthemen laut MEDLINE: Industrial Waste, Construction Materials, Alkalies. Die Arbeit nennt 89 Literaturangaben. Gefördert von: Natural Science Foundation of Hunan Province, Key Project of Research and Development Plan of Hunan Province, Scientific Research Foundation of Hunan Provincial Education Department.
Abstract (Originalsprache)
To promote the high-value utilization of industrial solid-waste carbide slag (CS) and low-reactivity illite, this study employed CS-assisted co-calcination to reconstruct the illite structure and improve its reactivity as a cementitious material. The modification process was systematically evaluated using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The results indicate that CS addition during calcination disrupts the illite crystal structure and promotes the formation of a more disordered calcium-bearing aluminosilicate precursor. Alkali-activated cementitious materials (AACs) were then prepared from the modified samples, and the effects of CS dosage, curing temperature, calcination temperature, and grinding time on mechanical performance and reaction products were investigated. Within the investigated range, specimens incorporating 10% CS showed an approximately 280% increase in compressive strength compared with the CS-free counterpart, while 20% CS provided a favorable balance between calcium supply and residual Ca-bearing phases. Prolonged grinding time promotes the alkali activation reactions. A 20% CS dosage provides sufficient Ca2+ to optimize the Ca/Si ratio, thereby promoting the formation of hydrate gels. This work demonstrates the feasibility of transforming carbide slag and low-grade clays into value-added cementitious materials, providing a promising route for industrial solid-waste valorization and expanding the raw-material resources for alkali-activated binders.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Transportation, Changsha University of Science & Technology, Changsha, 410114, China.
- School of Transportation, Changsha University of Science & Technology, Changsha, 410114, China; Materials and Constructions, Department of Civil Engineering, KU Leuven, Campus Leuven, Leuven, 3001, Belgium. Electronic a…
Förderung
- Natural Science Foundation of Hunan Province
- Key Project of Research and Development Plan of Hunan Province
- Scientific Research Foundation of Hunan Provincial Education Department
- National College Students Innovation and Entrepreneurship Training Program
- National Natural Science Foundation of China
Zitieren
APA
Gao, Y., Xu, W., Li, Y., Dong, K., Zhu, J., Huang, Y., & Li, C. (2026). Feasibility study on developing alkali-activated cementitious materials via calcination-induced structural reconstruction of carbide slag and illite. Environmental Research, 305, 124991. https://doi.org/10.1016/j.envres.2026.124991
Vancouver
Gao Y, Xu W, Li Y, Dong K, Zhu J, Huang Y, et al. Feasibility study on developing alkali-activated cementitious materials via calcination-induced structural reconstruction of carbide slag and illite. Environmental Research. 2026;305:124991. doi:10.1016/j.envres.2026.124991
BibTeX
@article{Gao2026,
author = {Gao, Yingli and Xu, Weilun and Li, Yuelin and Dong, Kai and Zhu, Juncai and Huang, Yuqiang and Li, Chengxian},
title = {Feasibility study on developing alkali-activated cementitious materials via calcination-induced structural reconstruction of carbide slag and illite},
journal = {Environmental Research},
year = {2026},
volume = {305},
pages = {124991},
doi = {10.1016/j.envres.2026.124991}
}
EUVIMED