Co-hydrothermal carbonization of typical plastics waste and garden waste: Effect of plastic additives on hydrochar formation and properties
Environmental Research · 2026-06 · 299 · 124370
DOI: 10.1016/j.envres.2026.124370 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Research, 2026-06. Verfasst von Chenyu Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Collaborative Innovation Center of Atmospheric Environment and Equipment Technology (CICAEET), Jiangsu Key Laboratory of Atmospheric Environm…. Hauptthemen laut MEDLINE: Plastics, Charcoal, Waste Management. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: Graduate Research and Innovation Projects of Jiangsu Province, Ministry of Science and Technology of the People's Republic of China, JIangsu Education Department.
Abstract (Originalsprache)
Co-hydrothermal carbonization (co-HTC) of plastics and garden waste (GW) is a promising strategy for plastic waste management, while the impact of plastic additives, which are inherent in plastic production, on this process has not been fully elucidated. This study elucidates the role of three plastic additives (bisphenol A, calcium stearate, lead sulfate) in governing the reaction behavior of co-HTC and the hydrochar functionality during the conversion of GW with four representative plastics (PVC, PET, PS, PP). The results revealed that lead sulfate significantly increased PVC derived hydrochar yield (maximum reach 56.3 ± 0.8 %), suppressed particle agglomeration in PS/PP, and improved PVC dechlorination efficiency by 10.9%. In contrast, calcium stearate generally reduced hydrochar yield and promoted undesirable agglomeration. Based on typical downstream application scenarios of hydrochar, the effects of plastic additives on the performance of hydrochar were further evaluated. Bisphenol A enhanced the fuel properties of PET/GW-derived hydrochar by increasing the carbon content (58.7 % to 59.3 %) and higher heating value (19.87 to 20.93 MJ/kg), while also elevating ignition and burnout temperatures, indicating improved combustion stability. For adsorption performance, lead sulfate-modified PVC/GW hydrochar showed a notable increase (up to 42.7%) in tetracycline adsorption capacity over calcium stearate at higher additive levels, despite an overall initial performance decline caused by additives, whereas bisphenol A suppressed it via competitive π-π interactions. These findings resolve a key knowledge gap in additive-mediated hydrochar formation, enabling tailored co-HTC process design for plastic waste valorization.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Jiangsu Collaborative Innovation Center of Atmospheric Environment and Equipment Technology (CICAEET), Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, School of Environmental Science…
- Nanjing Institute of Environmental Sciences, Ministry of Ecology and Environment of the People's Republic of China, Nanjing, 210042, China. Electronic address: zhaozehua@nies.org.
Förderung
- Graduate Research and Innovation Projects of Jiangsu Province
- Ministry of Science and Technology of the People's Republic of China
- JIangsu Education Department
- National Natural Science Foundation of China
Zitieren
APA
Wang, C., Zhang, R., Sun, W., Zhou, H., & Zhao, Z. (2026). Co-hydrothermal carbonization of typical plastics waste and garden waste: Effect of plastic additives on hydrochar formation and properties. Environmental Research, 299, 124370. https://doi.org/10.1016/j.envres.2026.124370
Vancouver
Wang C, Zhang R, Sun W, Zhou H, Zhao Z. Co-hydrothermal carbonization of typical plastics waste and garden waste: Effect of plastic additives on hydrochar formation and properties. Environmental Research. 2026;299:124370. doi:10.1016/j.envres.2026.124370
BibTeX
@article{Wang2026,
author = {Wang, Chenyu and Zhang, Rui and Sun, Weibo and Zhou, Han and Zhao, Zehua},
title = {Co-hydrothermal carbonization of typical plastics waste and garden waste: Effect of plastic additives on hydrochar formation and properties},
journal = {Environmental Research},
year = {2026},
volume = {299},
pages = {124370},
doi = {10.1016/j.envres.2026.124370}
}
EUVIMED