Sustainable valorization of recycled polypropylene waste in concrete composites via compression casting: Integrating lifecycle, cost, and engineering assessments for plastic waste management
Environmental Research · 2026
DOI: 10.1016/j.envres.2026.124270 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Research, 2026. Verfasst von Syed Minhaj Saleem Kazmi und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanics and Construction Engineering, Jinan University, Guangzhou, 510632, China. Electronic address: smskazmi@jnu.edu.cn. Hauptthemen laut MEDLINE: Polypropylenes, Recycling, Construction Materials, Waste Management. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 113 Literaturangaben. Gefördert von: Shenzhen Science and Technology Innovation Commission, National Natural Science Foundation of China.
Abstract (Originalsprache)
The escalating plastic waste accumulation and natural sand depletion underscore the need for sustainable solid waste processing and valorization. This study presents compression casting (CC) densification as a scalable mechanical treatment approach to convert recycled polypropylene (RP) aggregates into high-performance composites. It integrates a Life Cycle Assessment-Cost-Engineering-Multi-Criteria Analysis (LCA-Cost-Engineering-MCA) framework to evaluate mechanical performance, durability, environmental impacts, and economic efficiency. Six RP composite mixtures (0-40% sand replacement) were produced under conventional and CC conditions to demonstrate the framework's effectiveness. CC mitigated RP-induced performance losses, achieving up to 103% higher compressive strength and 63% higher tensile strength, with bulk density increases of 7%. Durability improvements included 88-93% reduction in carbonation depth, 59-71% lower chloride migration, and 24-40% decrease in permeable voids. LCA results showed that RP substitution reduced global warming potential and non-renewable energy per cubic meter by up to 11.7%. For the 40% recycled polypropylene compression-cast concrete, strength-normalized impacts decreased by 10-14% across CO2 emissions, energy use, human health, and ecosystem quality relative to the conventionally cast reference concrete. Economic evaluation revealed that replacing natural sand with RP reduced concrete costs by up to 9% per cubic meter and 19% per block, while combining RP with compression casting further decreased cost per unit strength by up to 47%. LCA-Cost-Engineering-MCA ranked the compression-cast reference mix highest (0.949), with 40% recycled polypropylene compression-cast concrete second (0.709) among recycled mixes. This reflects the synergy of mechanical, durability, environmental, and economic performance. These results demonstrate that process-driven densification, rather than compositional modification alone, can transform high-volume RP composites into high-performance, low-carbon, and cost-efficient materials. This offers a scalable solution for plastic solid waste management and circular construction materials. The proposed LCA-Cost-Engineering-MCA framework provides a quantitative decision-support tool for integrating material circularity with sustainable manufacturing, bridging laboratory findings with industrial-scale applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Mechanics and Construction Engineering, Jinan University, Guangzhou, 510632, China. Electronic address: smskazmi@jnu.edu.cn.
- School of Mechanics and Construction Engineering, Jinan University, Guangzhou, 510632, China. Electronic address: junaid@jnu.edu.cn.
- School of Mechanics and Construction Engineering, Jinan University, Guangzhou, 510632, China; Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen University, Shenzhen, 518060, China.…
Förderung
- Shenzhen Science and Technology Innovation Commission
- National Natural Science Foundation of China
Zitieren
APA
Kazmi, S. M. S., Munir, M. J., & Wu, Y. F. (2026). Sustainable valorization of recycled polypropylene waste in concrete composites via compression casting: Integrating lifecycle, cost, and engineering assessments for plastic waste management. Environmental Research. https://doi.org/10.1016/j.envres.2026.124270
Vancouver
Kazmi SMS, Munir MJ, Wu YF. Sustainable valorization of recycled polypropylene waste in concrete composites via compression casting: Integrating lifecycle, cost, and engineering assessments for plastic waste management. Environmental Research. 2026. doi:10.1016/j.envres.2026.124270
BibTeX
@article{Kazmi2026,
author = {Kazmi, Syed Minhaj Saleem and Munir, Muhammad Junaid and Wu, Yu-Fei},
title = {Sustainable valorization of recycled polypropylene waste in concrete composites via compression casting: Integrating lifecycle, cost, and engineering assessments for plastic waste management},
journal = {Environmental Research},
year = {2026},
doi = {10.1016/j.envres.2026.124270}
}
EUVIMED