EUVIMEDEUVIMED entdecken
Crossref

OneWater-driven waste-to-watt innovation: Electroactive Polymer–Metal oxide nanostructures for integrated energy production and reuse of wastewater

Lakeswer Dadsena, Tungabidya Maharana, Satya Eswari Jujjavarapu

Environmental Research · 2026

DOI: 10.1016/j.envres.2026.123764 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Research, 2026. Verfasst von Lakeswer Dadsena und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, National Institute of Technology Raipur, Chhattisgarh, 492010, India. Hauptthemen laut MEDLINE: Bioelectric Energy Sources, Wastewater, Titanium, Polymers. Die Arbeit nennt 72 Literaturangaben. Gefördert von: University Grants Commission South Eastern Regional Office, National Institute of Technology, Raipur.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The OneWater paradigm emphasizes integrated and circular management of water resources, promoting technologies that simultaneously address water scarcity, energy demand, and environmental sustainability. Microbial fuel cells (MFCs) support these objectives by converting organic pollutants into renewable bioelectricity while treating wastewater. In this study, high-performance bioanodes based on polypyrrole-titanium dioxide (PPy-TiO2) nanocomposites were developed on nickel foam (PPy-TiO2/NF) and graphite sheet (PPy- TiO2/GS) substrates to enhance electrochemical activity and microbial electron transfer. Comprehensive structural characterization (XRD, FTIR, SEM, TEM, SAED, EDX) confirmed the uniform incorporation of anatase-phase TiO2 within a conductive PPy matrix, forming a porous and electroactive surface. Electrochemical analyses revealed significantly reduced charge-transfer resistance and enhanced pseudocapacitive behavior for PPy-TiO2/NF, which translated into superior MFC performance. When operated with Citrobacter freundii, the PPy- TiO2/NF anode achieved a peak voltage of 998 ± 10 mV, maximum power density of 2411 ± 30 mW/m2, current density of 2416 ± 25 mA/m2, and high treatment efficiency with 86.40 ± 0.8 % COD removal and 35.56 ± 1.7 % coulombic efficiency. Dense, viable biofilms on the 3D nickel foam scaffold further supported enhanced electron recovery. To assess practical scalability, three PPy-TiO2/NF-based MFC units were successfully stacked in series, generating >2.0 V sufficient to illuminate an LED bulb. Following treatment, the effluent was UV-disinfected and safely reused for non-potable applications such as landscape irrigation, demonstrating direct integration of wastewater treatment, energy recovery, and water reuse. These results highlight PPy-TiO2-modified electrodes as robust and sustainable candidates for decentralized circular water-energy systems under OneWater frameworks.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Bioelectric Energy SourcesWastewaterTitaniumPolymersWaste Disposal, FluidNanostructuresPyrrolesNickelElectrodes

Stichwörter der Autor:innen

Energy storageGreen energyMicrobial fuel cell-One-water chamberNanomaterialsWastewater treatment

Substanzen

WastewaterTitaniumPolymerstitanium dioxidepolypyrrolePyrrolesNickel

Autor:innen und Institutionen

  • Department of Chemistry, National Institute of Technology Raipur, Chhattisgarh, 492010, India.
  • Department of Chemistry, National Institute of Technology Raipur, Chhattisgarh, 492010, India. Electronic address: tmaharana.chy@nitrr.ac.in.
  • Department of Biotechnology, National Institute of Technology Raipur, Chhattisgarh, 492010, India. Electronic address: satyaeswarij.bt@nitrr.ac.in.

Förderung

  • University Grants Commission South Eastern Regional Office
  • National Institute of Technology, Raipur

Zitieren

APA

Dadsena, L., Maharana, T., & Jujjavarapu, S. E. (2026). OneWater-driven waste-to-watt innovation: Electroactive Polymer–Metal oxide nanostructures for integrated energy production and reuse of wastewater. Environmental Research. https://doi.org/10.1016/j.envres.2026.123764

Vancouver

Dadsena L, Maharana T, Jujjavarapu SE. OneWater-driven waste-to-watt innovation: Electroactive Polymer–Metal oxide nanostructures for integrated energy production and reuse of wastewater. Environmental Research. 2026. doi:10.1016/j.envres.2026.123764

BibTeX
@article{Dadsena2026,
  author = {Dadsena, Lakeswer and Maharana, Tungabidya and Jujjavarapu, Satya Eswari},
  title = {OneWater-driven waste-to-watt innovation: Electroactive Polymer–Metal oxide nanostructures for integrated energy production and reuse of wastewater},
  journal = {Environmental Research},
  year = {2026},
  doi = {10.1016/j.envres.2026.123764}
}
Kostenlos starten →