EUVIMEDEUVIMED entdecken
Crossref

Engineering properties and mechanistic insights of fluid fill material derived from multi-source solid wastes

Yuehui Xia, Xiaofei Wei, Jianhua Yuan

Environmental Research · 2025

DOI: 10.1016/j.envres.2025.122344 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Research, 2025. Verfasst von Yuehui Xia und 2 weiteren Autor:innen. Beteiligte Einrichtung: Hunan Province Key Laboratory of Typical Environmental Pollution and Health Hazards, School of Public Health, Hengyang Medical School, University of …. Hauptthemen laut MEDLINE: Solid Waste, Refuse Disposal. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: Science and Technology Commission of Shanghai Municipality.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The synergistic resource utilization of solid waste represents a critical scientific challenge in the field of environmental engineering. This study innovatively proposes a solid waste-based fluid-filled material (FFM) to address the significant physicochemical differences among multi-source solid wastes, including drinking water treatment residues (DWTR), mixing station sediments (MSS), recycled fine aggregates (RFA), and mud. The results demonstrate that by precisely controlling the fluidity (160-200 mm), water-to-solid ratio (0.52-0.87), and wet density (1.47-1.68 g/cm3) of the material, FFM with excellent mechanical properties can be obtained, exhibiting 7-day and 28-day compressive strengths of 0.20-1.20 MPa and 0.40-1.40 MPa, respectively. Under the premise of meeting performance requirements, the mechanical properties of FFM significantly improve with increasing proportions of low-carbon composite cementitious material (LCCCM) and RFA, as well as with extended curing age. Through systematic optimization, the optimal mix ratio for FFM was determined as Lime∶ DWTR∶ MSS∶ RFA∶ mud∶ LCCCM = 1∶ 5∶ 5∶ 10∶ 67∶ 12, achieving a 28-day compressive strength of 0.70 MPa, which complies with the engineering requirements specified in the standard. Furthermore, micro-characterization technology techniques, including scanning electron microscopy (SEM) and X-ray diffraction (XRD), demonstrate that: (1) the multi-component materials form a densely packed structure, significantly enhancing mechanical properties; and (2) hydration products effectively fill pores, dramatically improving material durability. These findings provide theoretical guidance for the design and development of low-carbon flowable solidified soils.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Solid WasteRefuse DisposalRecyclingCompressive StrengthEngineering

Stichwörter der Autor:innen

Fluidic fill materialMixing station sedimentRecycled fine aggregateResource utilizationmud

Substanzen

Solid Waste

Autor:innen und Institutionen

  • Hunan Province Key Laboratory of Typical Environmental Pollution and Health Hazards, School of Public Health, Hengyang Medical School, University of South China, Hengyang, 421001, China; Shanghai Construction Environmen…
  • Shanghai Shenhuan Environmental Engineering Co., Ltd, No. 700 Dongda Ming Road, Hongkou District, Shanghai, 200080, China.
  • Hunan Province Key Laboratory of Typical Environmental Pollution and Health Hazards, School of Public Health, Hengyang Medical School, University of South China, Hengyang, 421001, China. Electronic address: 2025001034@u…

Förderung

  • Science and Technology Commission of Shanghai Municipality

Zitieren

APA

Xia, Y., Wei, X., & Yuan, J. (2025). Engineering properties and mechanistic insights of fluid fill material derived from multi-source solid wastes. Environmental Research. https://doi.org/10.1016/j.envres.2025.122344

Vancouver

Xia Y, Wei X, Yuan J. Engineering properties and mechanistic insights of fluid fill material derived from multi-source solid wastes. Environmental Research. 2025. doi:10.1016/j.envres.2025.122344

BibTeX
@article{Xia2025,
  author = {Xia, Yuehui and Wei, Xiaofei and Yuan, Jianhua},
  title = {Engineering properties and mechanistic insights of fluid fill material derived from multi-source solid wastes},
  journal = {Environmental Research},
  year = {2025},
  doi = {10.1016/j.envres.2025.122344}
}
Kostenlos starten →