Hydration characteristics and sustainability of calcium carbide slag-activated full solid waste cementitious materials under high temperature curing
Environmental Research · 2025-11 · 285 · 122309
DOI: 10.1016/j.envres.2025.122309 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Research, 2025-11. Verfasst von Xiaowei Gu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Resources and Civil Engineering, Northeastern University, Shenyang, 110819, China; Science and Technology Innovation Center of Smart Water …. Hauptthemen laut MEDLINE: Construction Materials, Calcium Compounds, Carbon Compounds, Inorganic, Solid Waste. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 107 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Using calcium carbide slag (CCS) to replace ordinary portland cement (OPC) as an alkali activator for the preparation of full solid waste cementitious material is a green and low carbon method. This study investigates the influence of 80 °C high-temperature curing on ground granulated blast furnace slag - steel slag based supersulfated cement (GS-SSC) incorporating 0 to 20 wt% CCS. The hydration products and microstructure of GS-SSC were analysed using various microscopic techniques, assess the compressive strength and pH value development, exploring the hydration mechanism of CCS activated GS-SSC. The results indicated that the CCS could increase the alkalinity of GS-SSC, activate the pozzolanic activity of ground granulated blast furnace slag-steel slag (GGBS-SS). Compared with the control group, the CCS promote the generation of more AFt and C-(A)-S-H gels, fill the pores and microcracks of the samples, making the microstructures denser. CCS significantly increased the compressive strength of the samples under curing at high temperatures. When 10 % CCS was incorporated, the compressive strength reached 31.2 MPa at 3 d and further increased to 33.5 MPa at 7 d. Moreover, sustainability assessment results indicate that the material exhibits favorable environmental and performance sustainability under this dosage condition. It is remarkable that a higher CCS content (>10 %) has a negative effect on the compressive strength of the samples. These results provide a new approach to promote the resourceful efficient utilization of industrial solid waste and serve as a valuable reference for designing low carbon cementitious materials based on GGBS-SS.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Resources and Civil Engineering, Northeastern University, Shenyang, 110819, China; Science and Technology Innovation Center of Smart Water and Resource Environment, Northeastern University, Shenyang, 110819, C…
- School of Architecture and Civil Engineering, Shenyang University of Technology, Shenyang, 110870, China.
- China Northeast Architectural Design & Research Institute Co. Ltd, Shenyang, 110000, China.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Gu, X., Wang, X., Ge, X., Wang, S., Hu, Z., Wang, H., Liu, J., Zhang, X., & Wang, X. (2025). Hydration characteristics and sustainability of calcium carbide slag-activated full solid waste cementitious materials under high temperature curing. Environmental Research, 285, 122309. https://doi.org/10.1016/j.envres.2025.122309
Vancouver
Gu X, Wang X, Ge X, Wang S, Hu Z, Wang H, et al. Hydration characteristics and sustainability of calcium carbide slag-activated full solid waste cementitious materials under high temperature curing. Environmental Research. 2025;285:122309. doi:10.1016/j.envres.2025.122309
BibTeX
@article{Gu2025,
author = {Gu, Xiaowei and Wang, Xu and Ge, Xiaowei and Wang, Shenyu and Hu, Ziyang and Wang, Hongyu and Liu, Jianping and Zhang, Xinlong and Wang, Xueli},
title = {Hydration characteristics and sustainability of calcium carbide slag-activated full solid waste cementitious materials under high temperature curing},
journal = {Environmental Research},
year = {2025},
volume = {285},
pages = {122309},
doi = {10.1016/j.envres.2025.122309}
}
EUVIMED