EUVIMEDEUVIMED entdecken
Crossref

Effects of curing methods on microstructure, mechanical properties, and heavy metal immobilization in non-sintered MSWIFA-based lightweight aggregates

Ximeng Wu, Haifeng Wang, Weichao Guo, Dong Wang, Caihong Xue, Qingxin Zhao, Jiaqiang Tang, Huimin Pan

Environmental Research · 2025-11 · 284 · 122180

DOI: 10.1016/j.envres.2025.122180 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Research, 2025-11. Verfasst von Ximeng Wu und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, 066004, Hebei, China; Hebei Province Engineerin…. Hauptthemen laut MEDLINE: Metals, Heavy, Coal Ash, Incineration, Solid Waste. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the rapid economic growth and accelerated urbanization, solid waste recycling has become a critical priority for eco-friendly urban development. Although some studies have investigated cold-bonded aggregates using MSWIFA, the effect of curing environments on heavy metal immobilization and mechanical behavior remains poorly understood. This study utilizes solid wastes such as municipal solid waste incineration fly ash (MSWIFA) and carbide slag to produce environmentally friendly non-sintered lightweight aggregates, and the effect of curing temperature and solution on the properties, reaction products as well as heavy metal leaching was investigated. The results show that under steam curing at 60 °C for 12 h, using calcium carbide slag supernatant as the granulation solution, the mechanical strength of the aggregates reached more than 7.02 MPa, meeting the Chinese standards for lightweight aggregates. Steam curing promotes the formation of hydrocalumite minerals, but the peak gradually weakens when the curing temperature reaches 75 °C. Microstructural analysis through XRD, FTIR, SEM, and XPS revealed that high temperatures activated the latent reactivity of slag, accelerating the reactions and promoting the generation of more C-S-H gel and hydrated calcium aluminates. This study proposes an innovative use of MSWIFA and carbide slag to produce non-sintered aggregates and systematically evaluates their performance under various curing conditions. The results are validated by detailed characterization, confirming both the originality and reliability of the work. In conclusion, the non-sintered lightweight aggregates prepared from MSWIFA demonstrate good mechanical performance and environmental adaptability, providing a sustainable alternative to natural aggregates and a useful reference for eco-friendly construction materials.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Metals, HeavyCoal AshIncinerationSolid WasteRecycling

Stichwörter der Autor:innen

Curing methodsHeavy metal solidificationMunicipal solid waste incineration fly ashNon-sintered lightweight aggregate

Substanzen

Metals, HeavyCoal AshSolid Waste

Autor:innen und Institutionen

  • State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, 066004, Hebei, China; Hebei Province Engineering Research Center for Harmless Synergistic Treatment and Recycling of…
  • Cangzhou Qugang Expressway Construction CO. Ltd., Cangzhou, 062450, Hebei, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wu, X., Wang, H., Guo, W., Wang, D., Xue, C., Zhao, Q., Tang, J., & Pan, H. (2025). Effects of curing methods on microstructure, mechanical properties, and heavy metal immobilization in non-sintered MSWIFA-based lightweight aggregates. Environmental Research, 284, 122180. https://doi.org/10.1016/j.envres.2025.122180

Vancouver

Wu X, Wang H, Guo W, Wang D, Xue C, Zhao Q, et al. Effects of curing methods on microstructure, mechanical properties, and heavy metal immobilization in non-sintered MSWIFA-based lightweight aggregates. Environmental Research. 2025;284:122180. doi:10.1016/j.envres.2025.122180

BibTeX
@article{Wu2025,
  author = {Wu, Ximeng and Wang, Haifeng and Guo, Weichao and Wang, Dong and Xue, Caihong and Zhao, Qingxin and Tang, Jiaqiang and Pan, Huimin},
  title = {Effects of curing methods on microstructure, mechanical properties, and heavy metal immobilization in non-sintered MSWIFA-based lightweight aggregates},
  journal = {Environmental Research},
  year = {2025},
  volume = {284},
  pages = {122180},
  doi = {10.1016/j.envres.2025.122180}
}
Kostenlos starten →