EUVIMEDEUVIMED entdecken
Crossref

Enrichment of 3rd generation biodiesel/diesel blends with optimum boron oxide for cleaner diesel emissions by multi-objective optimization using RSM

Ahmet Canan

Environmental Research · 2025-07 · 276 · 121472

DOI: 10.1016/j.envres.2025.121472 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Research, 2025-07. Verfasst von Ahmet Canan. Beteiligte Einrichtung: Karabuk University, Faculty of Technology, Energy Systems Engineering Department, Karabuk, Turkey. Electronic address: ahmetcanan@karabuk.edu.tr. Hauptthemen laut MEDLINE: Biofuels, Vehicle Emissions, Gasoline, Air Pollutants. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 65 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing energy prices and growing scarcity of fossil fuels have contributed to the rising popularity of biodiesel as an alternative fuel for diesel engines. The incorporation of nanoparticles (NPs) into biodiesel/diesel fuel blends significantly contributes to the reduction of emissions by enhancing fuel atomization and decreasing ignition temperatures, which in turn facilitates improved combustion efficiency. Microalgae biodiesel with boron oxide (B2O3) NPs has not been evaluated for diesel engine performance. The study introduced B2O3 NPs to biodiesel produced from transesterification of 3rd-generation spirulina microalgae oil (SMO) under 500, 1000, 1500, 2000, 2500, and 3000 W engine loads. In the tests conducted to examine the impact on engine performance and emissions, B2O3 was added to standard diesel/biodiesel fuel blends in concentrations of 25, 50, and 75 ppm. Then, the optimization of the experimental results was carried out using the response surface methodology (RSM). The optimal operating conditions were achieved with a 1373.68 W engine load and a 49.34 ppm NPs concentration. Under these conditions, the selected output parameters brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), carbon monoxide (CO), carbon dioxide (CO2), nitrogen oxide (NOx), hydrocarbon (HC), and smoke were obtained as 17.99 %, 458.38 g/kWh, 0.027 %, 4.84 %, 443.99 ppm, 6.42 ppm, and 18.83 %, respectively. High R2 values have indicated the accuracy of the model. As a catalyst, B2O3 reduces emissions and improves engine performance.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BiofuelsVehicle EmissionsGasolineAir PollutantsNanoparticles

Stichwörter der Autor:innen

Boron oxide nanoparticleEmission reductionEngine performanceEnvironmentRSM optimizationSpirulina microalgae

Substanzen

BiofuelsVehicle EmissionsGasolineAir Pollutants

Autor:innen und Institutionen

  • Karabuk University, Faculty of Technology, Energy Systems Engineering Department, Karabuk, Turkey. Electronic address: ahmetcanan@karabuk.edu.tr.

Zitieren

APA

Canan, A. (2025). Enrichment of 3rd generation biodiesel/diesel blends with optimum boron oxide for cleaner diesel emissions by multi-objective optimization using RSM. Environmental Research, 276, 121472. https://doi.org/10.1016/j.envres.2025.121472

Vancouver

Canan A. Enrichment of 3rd generation biodiesel/diesel blends with optimum boron oxide for cleaner diesel emissions by multi-objective optimization using RSM. Environmental Research. 2025;276:121472. doi:10.1016/j.envres.2025.121472

BibTeX
@article{Canan2025,
  author = {Canan, Ahmet},
  title = {Enrichment of 3rd generation biodiesel/diesel blends with optimum boron oxide for cleaner diesel emissions by multi-objective optimization using RSM},
  journal = {Environmental Research},
  year = {2025},
  volume = {276},
  pages = {121472},
  doi = {10.1016/j.envres.2025.121472}
}
Kostenlos starten →