EUVIMEDEUVIMED entdecken
Crossref

Temperature-controlled microalgal biofilm detachment and harvesting assisted by ultrasonic from 3D porous substrates grafted with thermosensitive gels

Jiale Wang, Beiyu Zhang, Yun Huang, Xianqing Zhu, Ao Xia, Xun Zhu, Qiang Liao

Environmental Research · 2024-09 · 256 · 119245

DOI: 10.1016/j.envres.2024.119245 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Research, 2024-09. Verfasst von Jiale Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Low-grade Energy Utilization Technologies and Systems, Chongqing University, Ministry of Education, Chongqing, 400044, China; Insti…. Hauptthemen laut MEDLINE: Biofilms, Microalgae, Temperature, Gels. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 35 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microalgae have been renowned as the most promising energy organism with significant potential in carbon fixation. In the large-scale cultivation of microalgae, the 3D porous substrate with higher specific surface area is favorable to microalgae adsorption and biofilm formation, whereas difficult for biofilm detachment and microalgae harvesting. To solve this contradiction, N-isopropylacrylamide, a temperature-responsive gels material, was grafted onto the inner surface of the 3D porous substrate to form temperature-controllable interface wettability. The interfacial free energy between microalgae biofilm and the substrates increased from -63.02 mJ/m2 to -31.89 mJ/m2 when temperature was lowered from 32 °C to 17 °C, weakening the adsorption capacity of cells to the surface, and making the biofilm detachment ratio increased to 50.8%. When further cooling the environmental temperature to 4 °C, the detachment capability of microalgae biofilm kept growing. 91.6% of the cells in the biofilm were harvesting from the 3D porous substrate. And the biofilm detached rate was up to 19.84 g/m2/h, realizing the temperature-controlled microalgae biofilm harvesting. But, microalgae growth results in the secretion of extracellular polymeric substances (EPS), which enhanced biofilm adhesion and made cell detachment more difficult. Thus, ultrasonic vibration was used to reinforce biofilm detachment. With the help of ultrasonic vibration, microalgae biofilm detached rate increased by 143.45% to 41.07 g/m2/h. These findings provide a solid foundation for further development of microalgae biofilm detachment and harvesting technology.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BiofilmsMicroalgaeTemperatureGelsPorosityAcrylamides

Stichwörter der Autor:innen

Microalgal biofilmTemperature-controlled biofilm desorptionThe 3D porous substrateThermosensitive interfaceUltrasonic vibration

Substanzen

GelsN-isopropylacrylamideAcrylamides

Autor:innen und Institutionen

  • Key Laboratory of Low-grade Energy Utilization Technologies and Systems, Chongqing University, Ministry of Education, Chongqing, 400044, China; Institute of Engineering Thermophysics, School of Energy and Power Engineer…

Zitieren

APA

Wang, J., Zhang, B., Huang, Y., Zhu, X., Xia, A., Zhu, X., & Liao, Q. (2024). Temperature-controlled microalgal biofilm detachment and harvesting assisted by ultrasonic from 3D porous substrates grafted with thermosensitive gels. Environmental Research, 256, 119245. https://doi.org/10.1016/j.envres.2024.119245

Vancouver

Wang J, Zhang B, Huang Y, Zhu X, Xia A, Zhu X, et al. Temperature-controlled microalgal biofilm detachment and harvesting assisted by ultrasonic from 3D porous substrates grafted with thermosensitive gels. Environmental Research. 2024;256:119245. doi:10.1016/j.envres.2024.119245

BibTeX
@article{Wang2024,
  author = {Wang, Jiale and Zhang, Beiyu and Huang, Yun and Zhu, Xianqing and Xia, Ao and Zhu, Xun and Liao, Qiang},
  title = {Temperature-controlled microalgal biofilm detachment and harvesting assisted by ultrasonic from 3D porous substrates grafted with thermosensitive gels},
  journal = {Environmental Research},
  year = {2024},
  volume = {256},
  pages = {119245},
  doi = {10.1016/j.envres.2024.119245}
}
Kostenlos starten →