Highly efficient removal of tannic acid from wastewater using biomimetic porous materials
Environmental Research · 2024-07 · 252 · 118252
DOI: 10.1016/j.envres.2024.118252 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Research, 2024-07. Verfasst von Baoshan Tang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Highland Forest Science, Chinese Academy of Forestry. Research Center of Engineering and Technology of Characteristic Forest Resources, …. Hauptthemen laut MEDLINE: Tannins, Wastewater, Water Pollutants, Chemical, Biomimetic Materials. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
To effectively remove tannic acid (TA) from wastewater, using green and natural materials has attracted increasing attention. Inspired by Galla Chinensis (GC) with high content of TA, this study synthesized a biomimetic porous adsorbent to mimic the GC structure using dialdehyde tapioca starch (DTS) and gelatin (GL). The TA adsorption performance and mechanism of synthetic porous material were investigated. Results revealed that the porous material exhibited a maximum TA adsorption capacity of 1072.01 mg/g, along with a high removal rate of 95.16% under the conditions of a DTS-GL mass ratio of 1:1, DTS aldehyde content of 48.16%, a solid content of 5%, and a pH of 2 at 25 °C. The adsorption of TA by DTS was not affected by water-soluble cationic and anion. The adsorption kinetics of TA on the porous material followed the pseudo-second-order model, and this Langmuir adsorption model (R2 = 0.9954) which were well described the adsorption of TA by the material, indicating that the adsorption primarily occurred in a monolayer. FTIR, XRD, DSC, TG, XPS, and SEM-EDS were employed to characterize the structure characteristics of the porous material. The cross-linking between DTS and GL by Schiff base reaction imparted a chemical structure could absorb TA by hydrogen bonding. The TA desorption rates of in 30% acetone and 40% ethanol solutions were 88.76% and 91.03%, respectively. The porous material prepared by the GC-inspired approach holds promise as an ideal choice for loading polyphenolic compounds and provides a new perspective for the design and application of bioinspired engineering materials.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Institute of Highland Forest Science, Chinese Academy of Forestry. Research Center of Engineering and Technology of Characteristic Forest Resources, Key Laboratory of Breeding and Utilization of Resource Insects, Nation…
- College of Forestry, Southwest Forestry University, Kunming, 650224, China.
- Faculty of Chemical Engineering, Kunming University of Science and Technology, Kunming, 650500, China. Electronic address: lkjnkmwh@hotmail.com.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Tang, B., Li, M., Liu, L., Li, K., Xu, J., Ma, J., & Zhang, H. (2024). Highly efficient removal of tannic acid from wastewater using biomimetic porous materials. Environmental Research, 252, 118252. https://doi.org/10.1016/j.envres.2024.118252
Vancouver
Tang B, Li M, Liu L, Li K, Xu J, Ma J, et al. Highly efficient removal of tannic acid from wastewater using biomimetic porous materials. Environmental Research. 2024;252:118252. doi:10.1016/j.envres.2024.118252
BibTeX
@article{Tang2024,
author = {Tang, Baoshan and Li, Meijuan and Liu, Lanxiang and Li, Kai and Xu, Juan and Ma, Jinju and Zhang, Hong},
title = {Highly efficient removal of tannic acid from wastewater using biomimetic porous materials},
journal = {Environmental Research},
year = {2024},
volume = {252},
pages = {118252},
doi = {10.1016/j.envres.2024.118252}
}
EUVIMED