Recent advances in liquid fuel production from plastic waste via pyrolysis: Emphasis on polyolefins and polystyrene
Environmental Research · 2024-04 · 246 · 118154
DOI: 10.1016/j.envres.2024.118154 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Environmental Research, 2024-04. Verfasst von Soheil Valizadeh und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental Engineering, University of Seoul, Seoul 02504, South Korea. Hauptthemen laut MEDLINE: Polystyrenes, Pyrolysis. Die Arbeit wurde bisher 64-mal zitiert (Crossref) und nennt 205 Literaturangaben. Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
The management of plastic waste (PW) has become an indispensable worldwide issue because of the enhanced accumulation and environmental impacts of these waste materials. Thermo-catalytic pyrolysis has been proposed as an emerging technology for the valorization of PW into value-added liquid fuels. This review provides a comprehensive investigation of the latest advances in thermo-catalytic pyrolysis of PW for liquid fuel generation, by emphasizing polyethylene, polypropylene, and polystyrene. To this end, the current strategies of PW management are summarized. The various parameters affecting the thermal pyrolysis of PW (e.g., temperature, residence time, heating rate, pyrolysis medium, and plastic type) are discussed, highlighting their significant influence on feed reactivity, product yield, and carbon number distribution of the pyrolysis process. Optimizing these parameters in the pyrolysis process can ensure highly efficient energy recovery from PW. In comparison with non-catalytic PW pyrolysis, catalytic pyrolysis of PW is considered by discussing mechanisms, reaction pathways, and the performance of various catalysts. It is established that the introduction of either acid or base catalysts shifts PW pyrolysis from the conventional free radical mechanism towards the carbonium ion mechanism, altering its kinetics and pathways. This review also provides an overview of PW pyrolysis practicality for scaling up by describing techno-economic challenges and opportunities, environmental considerations, and presenting future outlooks in this field. Overall, via investigation of the recent research findings, this paper offers valuable insights into the potential of thermo-catalytic pyrolysis as an emerging strategy for PW management and the production of liquid fuels, while also highlighting avenues for further exploration and development.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Environmental Engineering, University of Seoul, Seoul 02504, South Korea.
- Department of Global Smart City, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon, 16419, South Korea; School of Civil, Architectural Engineering, and Landscape Architecture, Sungkyunkwan University, 2066 Seobu-…
- Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan 701, Taiwan; Research Center for Smart Sustainable Circular Economy, Tunghai University, Taichung 407, Taiwan; Department of Mechanical…
- Department of Environmental Engineering & Innovation and Development Center of Sustainable Agriculture, National Chung Hsing University, 145 Xingda Rd., South Dist., Taichung City 402, Taiwan; Institute of Analytical an…
- School of Environmental Engineering, University of Seoul, Seoul 02504, South Korea. Electronic address: catalica@uos.ac.kr.
Förderung
- National Research Foundation of Korea
Zitieren
APA
Valizadeh, S., Valizadeh, B., Seo, M. W., Choi, Y. J., Lee, J., Chen, W. H., Lin, K. A., & Park, Y. K. (2024). Recent advances in liquid fuel production from plastic waste via pyrolysis: Emphasis on polyolefins and polystyrene. Environmental Research, 246, 118154. https://doi.org/10.1016/j.envres.2024.118154
Vancouver
Valizadeh S, Valizadeh B, Seo MW, Choi YJ, Lee J, Chen WH, et al. Recent advances in liquid fuel production from plastic waste via pyrolysis: Emphasis on polyolefins and polystyrene. Environmental Research. 2024;246:118154. doi:10.1016/j.envres.2024.118154
BibTeX
@article{Valizadeh2024,
author = {Valizadeh, Soheil and Valizadeh, Behzad and Seo, Myung Won and Choi, Yong Jun and Lee, Jechan and Chen, Wei-Hsin and Lin, Kun-Yi Andrew and Park, Young-Kwon},
title = {Recent advances in liquid fuel production from plastic waste via pyrolysis: Emphasis on polyolefins and polystyrene},
journal = {Environmental Research},
year = {2024},
volume = {246},
pages = {118154},
doi = {10.1016/j.envres.2024.118154}
}
EUVIMED