Model established by response surface methodology for Cu(II) removal from water with mercaptoacetyl aminomethy polyacrylamide as flocculant
Environmental Pollution · 2025
DOI: 10.1016/j.envpol.2025.126322 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Pollution, 2025. Verfasst von Shengji Jiang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou, Gansu, 730070, PR China. Hauptthemen laut MEDLINE: Copper, Water Pollutants, Chemical, Water Purification, Acrylic Resins. Die Arbeit nennt 51 Literaturangaben. Gefördert von: Gansu Provincial Natural Science Foundation, National Natural Science Foundation of China.
Abstract (Originalsprache)
The flocculation process has been validated as a highly effective technique for the removal of heavy metal ions. A novel flocculant, mercaptoacetyl aminomethy polyacrylamide (MAAPAM), was synthesized from acrylamide, sodium formate, ammonium persulfate, formaldehyde, dimethylamine, and thioglycolic acid as the raw materials. Response surface methodology (RSM) was employed to optimize the flocculation conditions for Cu(II) removal using MAAPAM. The optimal conditions for achieving the maximum Cu(II) removal efficiency of 99.21 % were a Cu(II) concentration of 7.5 mg/L, a pH of 6.1, and a MAAPAM dosage ratio to Cu(II) concentration of 5.5:1. These conditions were in close agreement with the model predictions, with a relative error of less than 0.5 %. Furthermore, the applicability of the quadratic regression model developed through RSM was rigorously evaluated. Coexisting inorganic ions (Na+, Ca2+, NO3- and SO42-) in water samples exerted a slight inhibitory effect on the removal of Cu(II) and had minimal impact on the quadratic regression model. The relative error between the measured and predicted values was maintained within ±5 %. The analysis of floc morphology and fractal dimension was conducted to investigate the flocculation mechanism. The results demonstrated that the chelation reaction between the sulfhydryl groups (-SH) in MAAPAM and Cu(II) plays a predominant role in capturing Cu(II). Additionally, the adsorption bridging and netting-sweeping mechanisms are also critical for achieving efficient removal of Cu(II) during the flocculation process.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou, Gansu, 730070, PR China.
- School of Environmental and Municipal Engineering, Lanzhou Jiaotong University, Lanzhou, Gansu, 730070, PR China. Electronic address: gangw99@163.com.
Förderung
- Gansu Provincial Natural Science Foundation
- National Natural Science Foundation of China
Zitieren
APA
Jiang, S., Wang, G., Wang, L., Wang, X., & Dai, L. (2025). Model established by response surface methodology for Cu(II) removal from water with mercaptoacetyl aminomethy polyacrylamide as flocculant. Environmental Pollution. https://doi.org/10.1016/j.envpol.2025.126322
Vancouver
Jiang S, Wang G, Wang L, Wang X, Dai L. Model established by response surface methodology for Cu(II) removal from water with mercaptoacetyl aminomethy polyacrylamide as flocculant. Environmental Pollution. 2025. doi:10.1016/j.envpol.2025.126322
BibTeX
@article{Jiang2025,
author = {Jiang, Shengji and Wang, Gang and Wang, Lulu and Wang, Xin and Dai, Liang},
title = {Model established by response surface methodology for Cu(II) removal from water with mercaptoacetyl aminomethy polyacrylamide as flocculant},
journal = {Environmental Pollution},
year = {2025},
doi = {10.1016/j.envpol.2025.126322}
}
EUVIMED