Assessment of thermal power plant CO2 emissions quantification performance and uncertainty of measurements by ground-based remote sensing
Environmental Pollution · 2024
DOI: 10.1016/j.envpol.2024.124886 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Pollution, 2024. Verfasst von Chao Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: Anhui Institute of Optics and Fine Mechanics, Hefei Institute of Physical Science, Chinese Academy of Sciences, Hefei, 230031, China; University of S…. Hauptthemen laut MEDLINE: Carbon Dioxide, Environmental Monitoring, Power Plants, Air Pollutants. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 48 Literaturangaben.
Abstract (Originalsprache)
Thermal power plants serve as significant CO2 sources, and accurate monitoring of their emissions is crucial for improving the precision of global carbon emission estimates. In this study, a measurement method based on measuring point source plumes was employed in ground-based remote sensing experiments at the thermal power plant. By simulating CO2 plumes, we analyzed the impact of surrounding urban structures, the geometric relationship between measurement points and plumes, and the influence on measurement points selection. We also assessed the capability and uncertainties in quantifying CO2 emissions. For the Hefei power plant, CO2 emission estimates were on average 7.98 ± 10.01 kg/s higher with surface buildings compared to scenarios without buildings (approximately 4.09% error). By selectively filtering discrete data, the emission estimation errors were significantly reduced by 7.31 ± 7.13 kg/s compared to pre-filtered data. Regarding the relationship between observation paths and plume geometry, simulation studies indicated that the ability to estimate CO2 emissions varied for near and middle segment observations. The lowest emission rate error was found in the mid-segment near 1.5-2.0 km, reaching 7.13 ± 5.39 kg/s. CO2 distribution at the mid-segment position becomes more uniform relative to the near segment, making it more suitable for meeting emission estimation requirements. Optimizing measurement schemes by considering environmental factors and precisely selecting measurement points significantly enhances emission estimation accuracy, providing crucial technical support for top-down estimates of anthropogenic CO2 emissions.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Anhui Institute of Optics and Fine Mechanics, Hefei Institute of Physical Science, Chinese Academy of Sciences, Hefei, 230031, China; University of Science and Technology of China, Hefei, 230026, China; Key Laboratory o…
- Anhui Institute of Optics and Fine Mechanics, Hefei Institute of Physical Science, Chinese Academy of Sciences, Hefei, 230031, China; Key Laboratory of General Optical Calibration and Characterization Technology, Hefei…
Zitieren
APA
Li, C., Wang, X., Ye, H., Wu, S., Shi, H., An, Y., & Sun, E. (2024). Assessment of thermal power plant CO2 emissions quantification performance and uncertainty of measurements by ground-based remote sensing. Environmental Pollution. https://doi.org/10.1016/j.envpol.2024.124886
Vancouver
Li C, Wang X, Ye H, Wu S, Shi H, An Y, et al. Assessment of thermal power plant CO2 emissions quantification performance and uncertainty of measurements by ground-based remote sensing. Environmental Pollution. 2024. doi:10.1016/j.envpol.2024.124886
BibTeX
@article{Li2024,
author = {Li, Chao and Wang, Xianhua and Ye, Hanhan and Wu, Shichao and Shi, Hailiang and An, Yuan and Sun, Erchang},
title = {Assessment of thermal power plant CO2 emissions quantification performance and uncertainty of measurements by ground-based remote sensing},
journal = {Environmental Pollution},
year = {2024},
doi = {10.1016/j.envpol.2024.124886}
}
EUVIMED