Enhanced adsorption of tylosin by ordered multistage porous carbon and efficient in-situ regeneration of saturated adsorbents by activated persulfate oxidation: Performance, mechanism and multiple cycles
Environmental Pollution · 2024
DOI: 10.1016/j.envpol.2024.124861 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Pollution, 2024. Verfasst von Zhi Hu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental Science and Engineering, Shaanxi University of Science & Technology, Xi'an, 710021, China; Shaanxi Key Laboratory of Green Pr…. Hauptthemen laut MEDLINE: Water Pollutants, Chemical, Oxidation-Reduction, Tylosin, Carbon. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Key Research and Development Projects of Shaanxi Province.
Abstract (Originalsprache)
In this study, a novel ordered multistage porous carbon (OMPC) with a micro-mesoporous structure was prepared and used for the removal of tylosin (TYL). The porous material, carbonized at 900 °C (OMPC-900), exhibited micro-mesoporous structures with pore sizes of 0.71 nm and 3.63 nm, while had a specific surface area of 1300.02 m2 g-1. OMPC-900 demonstrated a maximum adsorption capacity of 341.28 mg g-1 for TYL in water by electrostatic attraction, hydrogen bonding, π-π interactions, and pore-filling mechanisms, which is 6.41 times higher than that of activated carbon. The TYL-saturated adsorbents could be efficiently regenerated by in-situ oxidation through the activation of persulfate (PDS), achieving a regeneration rate of 94.17%, significantly higher than that of activated carbon (55.22%). The excellent regeneration performance may be attributed to the presence of -C=O and graphitic carbon in the adsorbent, which promotes the production of free radicals (•OH, SO4•- and •O2-) and non-free radicals. Among these, the non-radical pathways (1O2 and electron transfer) played a key role in the degradation of TYL loaded on the adsorbent. OMPC-900 maintained stable regenerative adsorption performance of 80.85% after five in-situ regeneration, and the normalized adsorption capacity per unit surface area increased from 0.21 to 0.39 mg m-2, which may be due to that the increase in oxygen-carbon ratio and surface defects improved the adsorption sites activity of the regenerated adsorbent. In comparison to conventional pyrolysis and organic solvent elution, oxidative regeneration through the activation of PDS is a more efficient and sustainable method.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Environmental Science and Engineering, Shaanxi University of Science & Technology, Xi'an, 710021, China; Shaanxi Key Laboratory of Green Preparation and Functionalization of Inorganic Materials, Xi'an, 710021,…
Förderung
- National Natural Science Foundation of China
- Key Research and Development Projects of Shaanxi Province
Zitieren
APA
Hu, Z., Wang, J., Tie, M., Zhu, J., & Sharaf, F. (2024). Enhanced adsorption of tylosin by ordered multistage porous carbon and efficient in-situ regeneration of saturated adsorbents by activated persulfate oxidation: Performance, mechanism and multiple cycles. Environmental Pollution. https://doi.org/10.1016/j.envpol.2024.124861
Vancouver
Hu Z, Wang J, Tie M, Zhu J, Sharaf F. Enhanced adsorption of tylosin by ordered multistage porous carbon and efficient in-situ regeneration of saturated adsorbents by activated persulfate oxidation: Performance, mechanism and multiple cycles. Environmental Pollution. 2024. doi:10.1016/j.envpol.2024.124861
BibTeX
@article{Hu2024,
author = {Hu, Zhi and Wang, Jiahong and Tie, Min and Zhu, Jie and Sharaf, Faisal},
title = {Enhanced adsorption of tylosin by ordered multistage porous carbon and efficient in-situ regeneration of saturated adsorbents by activated persulfate oxidation: Performance, mechanism and multiple cycles},
journal = {Environmental Pollution},
year = {2024},
doi = {10.1016/j.envpol.2024.124861}
}
EUVIMED