3D-printing of Fe–Ni bimetallic particles and their application in removal of arsenic from water
Environmental Pollution · 2024-09 · 356 · 124322
DOI: 10.1016/j.envpol.2024.124322 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Pollution, 2024-09. Verfasst von Kosisochi Ibebunjo und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering Science, Department of Separation Science, LUT University, FI-53850, Lappeenranta, Finland. Electronic address: Kosisochi.ibebu…. Hauptthemen laut MEDLINE: Arsenic, Water Pollutants, Chemical, Water Purification, Nickel. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 Marie Skłodowska-Curie Actions, Horizon 2020, Horizon 2020 Framework Programme.
Abstract (Originalsprache)
Arsenic is a hazardous element found in water sources, and removing it is crucial for ensuring a safe environment and water quality. Iron-based metal oxides efficiently remove arsenic; however, their small particle sizes make separation from water difficult after arsenic removal. Furthermore, the growing global issue of polymer waste further complicates environmental concerns. Combining three-dimensional (3D) printing and adsorption technology by incorporating nanosized functional materials into supporting polymers offers a potential solution to address both challenges. In this study, we developed a 3D-printed adsorption material through the incorporation of synthesized Fe-Ni bimetallic particles into a supporting polymer using selective laser sintering (SLS) technology. This adsorbent's properties were examined through scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR), and zeta potential. Furthermore, its performance in removing As(III) and As(V), even at trace levels, was assessed under varied conditions. The 3D-printed adsorbent demonstrated excellent removal of As(III) at pH 6, and As(V) at pH 4, lowering their concentration below 10 μg/L, thereby adhering to the limit established by the World Health Organization (WHO). Both As(III) and As(V) fitted the Freundlich isotherm and pseudo-second-order model, suggesting potential heterogeneous and chemisorption processes. FT-IR indicated that the exchange of the -OH group of Fe-OH with oxyanions of As(III) and As(V) could be the adsorption mechanism. Additionally, thermodynamic evaluation unveiled an endothermic and non-spontaneous adsorption reaction. The 3D-printed adsorbent exhibited excellent reusability across recurring adsorption cycles. The combination of SLS 3D printing with Fe-Ni bimetallic particles produces structures that retain their functionality in removing both arsenic species present in water. This indicates the potential of the 3D-printed adsorbent for effective treatment of arsenic-contaminated water, offering remedies to challenges like handling small particle sizes, mitigating polymer waste, and addressing environmental concerns.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Engineering Science, Department of Separation Science, LUT University, FI-53850, Lappeenranta, Finland. Electronic address: Kosisochi.ibebunjo@lut.fi.
- School of Engineering Science, Department of Separation Science, LUT University, FI-53850, Lappeenranta, Finland.
Förderung
- H2020 Marie Skłodowska-Curie Actions
- Horizon 2020
- Horizon 2020 Framework Programme
- Business Finland
Zitieren
APA
Ibebunjo, K., Bediako, J. K., El Ouardi, Y., & Repo, E. (2024). 3D-printing of Fe–Ni bimetallic particles and their application in removal of arsenic from water. Environmental Pollution, 356, 124322. https://doi.org/10.1016/j.envpol.2024.124322
Vancouver
Ibebunjo K, Bediako JK, El Ouardi Y, Repo E. 3D-printing of Fe–Ni bimetallic particles and their application in removal of arsenic from water. Environmental Pollution. 2024;356:124322. doi:10.1016/j.envpol.2024.124322
BibTeX
@article{Ibebunjo2024,
author = {Ibebunjo, Kosisochi and Bediako, John Kwame and El Ouardi, Youssef and Repo, Eveliina},
title = {3D-printing of Fe–Ni bimetallic particles and their application in removal of arsenic from water},
journal = {Environmental Pollution},
year = {2024},
volume = {356},
pages = {124322},
doi = {10.1016/j.envpol.2024.124322}
}
EUVIMED