Leaching of heavy metals from tungsten mining tailings: A case study based on static and kinetic leaching tests
Environmental Pollution · 2024-02 · 342 · 123055
DOI: 10.1016/j.envpol.2023.123055 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Pollution, 2024-02. Verfasst von Xiaojun Zheng und 4 weiteren Autor:innen. Beteiligte Einrichtung: Cooperative Innovation Center jointly established by the Ministry and the Ministry of Rare Earth Resources Development and Utilization, Ganzhou, 3410…. Hauptthemen laut MEDLINE: Soil Pollutants, Metals, Heavy. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Natural Science Foundation of Jiangxi Province.
Abstract (Originalsprache)
Heavy metal (HM) leaching from tungsten mine tailings is a serious environmental risk. In this study, we assess the HM pollution level of tungsten tailings, determine the HM leaching patterns and mechanisms, and estimate the HM fluxes from a tailings reservoir. The results showed that the comprehensive pollution index (CRSi) values that decreased in order of the HM pollution levels in the tailings were cadmium (Cd) > tungsten (W) > lead (Pb) > copper (Cu) = zinc (Zn) > arsenic (As) > manganese (Mn). This result indicated that Cd, W, and Pb were priority pollutants in tailings. The Res fraction of all HMs was greater than 50%. Pb and Cd had similar species fractions with high Exc fractions, and tungsten had a considerable proportion of the Wat fraction. The general acid neutralizing capacity (GANC) test divides the leaching process of HMs into two stages, and each of stage is affected by different mechanisms. A neutral environment promoted tungsten leaching in the column leching test, while an acidic environment promoted Cd and Pb leaching. In addition, the pH effect was more obvious in the early stage. The kinetic fitting results showed that the second-order dynamic model well simulated the leaching of W, Pb, and Cd in most cases. Based on column kinetic leaching test results and tailings parameters, the annual W, Pb, and Cd fluxes were estimated to be 6.35 × 108, 1.3288 × 109, and 1.012 × 108 mg/year, respectively. The above results can guide the environmental management of tungsten tailing reservoirs, such as selecting suitable repair materials and estimating repair service times.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Cooperative Innovation Center jointly established by the Ministry and the Ministry of Rare Earth Resources Development and Utilization, Ganzhou, 341000, Jiangxi, China; Key Laboratory of Environmental Pollution and Cont…
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangxi Province
Zitieren
APA
Zheng, X., Qiu, S., Zhou, B., Li, Q., & Chen, M. (2024). Leaching of heavy metals from tungsten mining tailings: A case study based on static and kinetic leaching tests. Environmental Pollution, 342, 123055. https://doi.org/10.1016/j.envpol.2023.123055
Vancouver
Zheng X, Qiu S, Zhou B, Li Q, Chen M. Leaching of heavy metals from tungsten mining tailings: A case study based on static and kinetic leaching tests. Environmental Pollution. 2024;342:123055. doi:10.1016/j.envpol.2023.123055
BibTeX
@article{Zheng2024,
author = {Zheng, Xiaojun and Qiu, Shiyue and Zhou, Buchan and Li, Qi and Chen, Ming},
title = {Leaching of heavy metals from tungsten mining tailings: A case study based on static and kinetic leaching tests},
journal = {Environmental Pollution},
year = {2024},
volume = {342},
pages = {123055},
doi = {10.1016/j.envpol.2023.123055}
}
EUVIMED