Chemical characteristics of fine tire wear particles generated on a tire simulator
Environmental Pollution · 2023-11 · 336 · 122399
DOI: 10.1016/j.envpol.2023.122399 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environmental Pollution, 2023-11. Verfasst von Quanyou Guo und 8 weiteren Autor:innen. Beteiligte Einrichtung: Tianjin Key Laboratory of Urban Transport Emission Research & State Environmental Protection Key Laboratory of Urban Ambient Air Particulate Matter P…. Hauptthemen laut MEDLINE: Air Pollutants, Polycyclic Aromatic Hydrocarbons. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 90 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China, Tianjin Municipal Science and Technology Committee.
Abstract (Originalsprache)
Tire wear is one of the major sources of traffic-related particle emissions, however, laboratory data on the components of tire wear particles (TWPs) is scarce. In this study, ten brands of tires, including two types and four-speed grades, were chosen for wear tests using a tire simulator in a closed chamber. The chemical components of PM2.5 were characterized in detail, including inorganic elements, water-soluble ions (WSIs), organic carbon (OC), elemental carbon (EC), and polycyclic aromatic hydrocarbons (PAHs). Inorganic elements, WSIs, OC, and EC accounted for 8.7 ± 2.1%, 3.1 ± 0.7%, 44.0 ± 0.9%, and 9.6 ± 2.3% of the mass of PM2.5, respectively. The OC/EC ratio ranged from 2.8 to 7.6. The inorganic elements were dominated by Si and Zn. The primary ions were SO42- and NO3-, and TWPs were proven to be acidic by applying an ionic balance. The total PAHs content was 113 ± 45.0 μg g-1, with pyrene being dominant. In addition, the relationship between the chemical components and tire parameters was analyzed. Inorganic elements and WSIs in TWPs were more abundant in all-season tires than those in winter tires, whereas the content of PAHs was the opposite. The mass fractions of OC, Si, and Al in the TWPs all showed increasing trends with increasing tire speed grade, but the PAHs levels showed a decreasing trend. Ultimately, to provide more data for further research, a TWPs source profile was constructed considering the tire weighting factor.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Tianjin Key Laboratory of Urban Transport Emission Research & State Environmental Protection Key Laboratory of Urban Ambient Air Particulate Matter Pollution Prevention and Control, College of Environmental Science and…
- China Automotive Technology and Research Center Co. Ltd, Tianjin 300300, China.
Förderung
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China
- Tianjin Municipal Science and Technology Committee
Zitieren
APA
Guo, Q., Men, Z., Liu, Z., Niu, Z., Fang, T., Liu, F., Wu, L., Peng, J., & Mao, H. (2023). Chemical characteristics of fine tire wear particles generated on a tire simulator. Environmental Pollution, 336, 122399. https://doi.org/10.1016/j.envpol.2023.122399
Vancouver
Guo Q, Men Z, Liu Z, Niu Z, Fang T, Liu F, et al. Chemical characteristics of fine tire wear particles generated on a tire simulator. Environmental Pollution. 2023;336:122399. doi:10.1016/j.envpol.2023.122399
BibTeX
@article{Guo2023,
author = {Guo, Quanyou and Men, Zhengyu and Liu, Zhenguo and Niu, Zhihui and Fang, Tiange and Liu, Fengyang and Wu, Lin and Peng, Jianfei and Mao, Hongjun},
title = {Chemical characteristics of fine tire wear particles generated on a tire simulator},
journal = {Environmental Pollution},
year = {2023},
volume = {336},
pages = {122399},
doi = {10.1016/j.envpol.2023.122399}
}
EUVIMED