Methods and tools for the safety assessment part of the European Commission’s safe and sustainable by design framework when applied to advanced materials
Environment International · 2025-11 · 205 · 109904
DOI: 10.1016/j.envint.2025.109904 ↗Kurz gefasst
Fachartikel in der Zeitschrift Environment International, 2025-11. Verfasst von Vicenç Pomar-Portillo und 20 weiteren Autor:innen. Beteiligte Einrichtung: Technology and Society Laboratory, Empa, Swiss Federal Laboratories for Materials Science and Technologies, Lerchenfeldstrasse 5, 9014 St. Gallen, Sw…. Hauptthemen laut MEDLINE: Sustainable Development. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 157 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spine Education and Research Institute, Swiss State Secretariat for Education Research and Innovation, European Commission.
Abstract (Originalsprache)
The Safe and Sustainable-by-Design (SSbD) framework by the EC-JRC (European Commission - Joint Research Centre) provides a structured approach to integrate safety and sustainability considerations from the earliest stages of chemical and material innovation. However, applying SSbD principles to advanced materials poses specific challenges due to their complex and diverse physicochemical properties. This work analyzes and maps hazard, exposure, fate and risk assessment methods and tools applicable to Steps 1, 2 and 3 of the EC-JRC SSbD framework, categorizing them across its three tiers to address different stages of product development. The analysis highlights the challenges of adapting conventional testing and modelling approaches to advanced materials, particularly for hazard assessment, and considers the relevance and limitations of tools originally developed for exposure and risk assessment of engineered nanomaterials when applied to broader advanced materials categories. An assessment of operational status, access conditions, and tool formats provides practical insights for researchers and industry stakeholders. The study identifies key methodological gaps and offers recommendations to improve and expand the current tool landscape. By providing a structured mapping of available resources and challenges, this work supports the effective implementation of SSbD principles, promoting the safe and sustainable development of advanced materials.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Technology and Society Laboratory, Empa, Swiss Federal Laboratories for Materials Science and Technologies, Lerchenfeldstrasse 5, 9014 St. Gallen, Switzerland.
- TEMAS Solutions GmbH, 5212 Hausen, Switzerland.
- International Research Center in Critical Raw Materials for Advanced Industrial Technologies-ICCRAM, Universidad de Burgos, Plaza Misael Bañuelos s/n, Burgos 09001, Spain.
- Department of Environmental Sciences, Informatics and Statistics, Ca' Foscari University of Venice, Via Torino 155, 30172 Venice, Italy.
- Institute of Occupational Medicine (IOM), Edinburgh, United Kingdom; Centre for Biomedicine and Global Health, School of Applied Sciences, Edinburgh Napier University, Edinburgh, United Kingdom.
- ITENE Research Center, C/Albert Einstein 1, 46980 Paterna, Valencia, Spain.
Förderung
- Spine Education and Research Institute
- Swiss State Secretariat for Education Research and Innovation
- European Commission
- Horizon Europe
Zitieren
APA
Pomar-Portillo, V., Suarez-Merino, B., Aparicio, S., Badetti, E., Boyles, M., Brunelli, A., Fito-López, C., Garmendia-Aguirre, I., Giubilato, E., Katsumiti, A., Laurini, E., Lofty, M., Marson, D., Pizzol, L., Rodríguez-Llopis, I., Rumbo, C., Scott-Fordsmand, J. J., Stone, V., Trabucco, S., …, & Nowack, B. (2025). Methods and tools for the safety assessment part of the European Commission’s safe and sustainable by design framework when applied to advanced materials. Environment International, 205, 109904. https://doi.org/10.1016/j.envint.2025.109904
Vancouver
Pomar-Portillo V, Suarez-Merino B, Aparicio S, Badetti E, Boyles M, Brunelli A, et al. Methods and tools for the safety assessment part of the European Commission’s safe and sustainable by design framework when applied to advanced materials. Environment International. 2025;205:109904. doi:10.1016/j.envint.2025.109904
BibTeX
@article{PomarPortillo2025,
author = {Pomar-Portillo, Vicenç and Suarez-Merino, Blanca and Aparicio, Santiago and Badetti, Elena and Boyles, Mathew and Brunelli, Andrea and Fito-López, Carlos and Garmendia-Aguirre, Irantzu and Giubilato, Elisa and Katsumiti, Alberto and Laurini, Erik and Lofty, Morgan and Marson, Domenico and Pizzol, Lisa and Rodríguez-Llopis, Isabel and Rumbo, Carlos and Scott-Fordsmand, Janeck J and Stone, Vicki and Trabucco, Sara and Hristozov, Danail and Nowack, Bernd},
title = {Methods and tools for the safety assessment part of the European Commission’s safe and sustainable by design framework when applied to advanced materials},
journal = {Environment International},
year = {2025},
volume = {205},
pages = {109904},
doi = {10.1016/j.envint.2025.109904}
}
EUVIMED