EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrochemical and photoelectrochemical aptasensors for the detection of environmental pharmaceutical pollutants

Teodora Lupoi, Yann R. Leroux, Bogdan Feier, Cecilia Cristea, Florence Geneste

Electrochimica Acta · 2025-08 · 530 · 146396

DOI: 10.1016/j.electacta.2025.146396 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electrochimica Acta, 2025-08. Verfasst von Teodora Lupoi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 221 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: French National Research Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pharmaceutical substances are emerging contaminants with the potential to significantly lower the quality of the environment due to their persistence. Evaluating environmental pollution is a critical area of research that can benefit from on-site, affordable, and accessible analytical methods. This review highlights recent advancements in electrochemical biosensors that use aptamers as recognition elements for pharmaceutical contaminants. The reasoning behind the selection of antibiotics, non-steroidal anti-inflammatories, and estrogen hormones is explained, considering factors such as environmental concentrations, toxicity, and selected aptamers. A thorough revision of the aptamers used in the studied literature, their characteristics, and functionalization was done. The coupling of aptamers with an electrochemical and photoelectrochemical transducer was explained, and the mechanisms for signal registration were detailed. An important focus was the construction of the aptasensors, where the materials and the integration of aptamers strongly influence the cost, complexity, and performance of the biosensor. The main materials used were classified into carbon-based, metallic, and semiconductors, with a justification for the use of covalent and non-covalent aptamer immobilization in each case. The analytical performance was systematically evaluated through parameters like the limit of detection, linearity range, and selectivity. After the global analysis, a conclusion as to whether electrochemical aptasensors can be applied to environmental analysis is reached, with limitations and possible improvements debated.

Förderung

  • French National Research Agency

Zitieren

APA

Lupoi, T., Leroux, Y. R., Feier, B., Cristea, C., & Geneste, F. (2025). Electrochemical and photoelectrochemical aptasensors for the detection of environmental pharmaceutical pollutants. Electrochimica Acta, 530, 146396. https://doi.org/10.1016/j.electacta.2025.146396

Vancouver

Lupoi T, Leroux YR, Feier B, Cristea C, Geneste F. Electrochemical and photoelectrochemical aptasensors for the detection of environmental pharmaceutical pollutants. Electrochimica Acta. 2025;530:146396. doi:10.1016/j.electacta.2025.146396

BibTeX
@article{Lupoi2025,
  author = {Lupoi, Teodora and Leroux, Yann R. and Feier, Bogdan and Cristea, Cecilia and Geneste, Florence},
  title = {Electrochemical and photoelectrochemical aptasensors for the detection of environmental pharmaceutical pollutants},
  journal = {Electrochimica Acta},
  year = {2025},
  volume = {530},
  pages = {146396},
  doi = {10.1016/j.electacta.2025.146396}
}
Kostenlos starten →