From lithium to potassium: Comparison of cations in poly(ethylene oxide)-based block copolymer electrolytes for solid-state alkali metal batteries
Electrochimica Acta · 2023-06 · 454 · 142421
DOI: 10.1016/j.electacta.2023.142421 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electrochimica Acta, 2023-06. Verfasst von Anna D. Khudyshkina und 9 weiteren Autor:innen. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Bildung und Forschung, Helmholtz Association, Stiftung der Deutschen Wirtschaft.
Abstract (Originalsprache)
Liquid electrolytes (LEs) commonly show severe side reactions at the electrode-electrolyte interface, especially with alkali metal anodes, leading to rapid capacity fade of metal-ion batteries. Solid polymer electrolytes (SPEs), however, contribute to the suppression of side reactions due to their inherent inertness and high mechanical strength, providing long-term stable battery operation. Herein, we investigated physical and electrochemical properties of SPEs based on our previously reported microphase-separated poly(vinyl benzyl methoxy poly (ethylene oxide) ether)- block -polystyrene block copolymer (PVBmPEO-b -PS) with different alkali metal ions ( A + = Li + , Na + or K + ) and their use in the respective metal batteries, showing the potential for the transition from lithium to post-lithium batteries. Rheological and thermal properties as well as ion transport in the SPEs with different bis(trifluoromethanesulfonyl)imide (TFSI) salts concentrations revealed similar shear storage moduli (G ’ ) for the investigated SPEs, while the lowest glass transition temperatures ( T g ) were found for KTFSI-based films. By contrast, the highest total ionic conductivity was found for the LiTFSI-based SPEs. To quantify the A + transference numbers ( T A + ), the Bruce-Vincent method and pulsed-field gradient (PFG) NMR were conducted, revealing significant challenges for T A + determination of post-Li systems. Further, the examination of the inter-facial stability of SPE/A interfaces by conducting plating/stripping experiments revealed significantly higher resistances for sodium-and potassium-based systems in comparison to their lithium-based counterpart. None-theless, A-metal/SPE/cathode cells with PVBmPEO-b -PS-based Na-and K-SPEs with the Prussian Blue analogues (PBAs, Na 2-x Fe[Fe(CN) 6 ] and K 2-x Fe[F e (CN) 6 ]) positive electrodes and the respective alkali metal negative electrodes enabled cycling at elevated temperature of 55 ◦ C. Herein, both sodium and potassium metal batteries exhibited stable cycling with capacity retentions of 73% over 100 cycles for the Na-cell, and 94% over the same cycle number for the K-cell, (and a high coulombic efficiency (CE) of 98% at the 100th cycle).
Förderung
- Bundesministerium für Bildung und Forschung
- Helmholtz Association
- Stiftung der Deutschen Wirtschaft
- Deutsche Forschungsgemeinschaft
Zitieren
APA
Khudyshkina, A. D., Butzelaar, A. J., Guo, Y., Hoffmann, M., Bergfeldt, T., Schaller, M., Indris, S., Wilhelm, M., Théato, P., & Jeschull, F. (2023). From lithium to potassium: Comparison of cations in poly(ethylene oxide)-based block copolymer electrolytes for solid-state alkali metal batteries. Electrochimica Acta, 454, 142421. https://doi.org/10.1016/j.electacta.2023.142421
Vancouver
Khudyshkina AD, Butzelaar AJ, Guo Y, Hoffmann M, Bergfeldt T, Schaller M, et al. From lithium to potassium: Comparison of cations in poly(ethylene oxide)-based block copolymer electrolytes for solid-state alkali metal batteries. Electrochimica Acta. 2023;454:142421. doi:10.1016/j.electacta.2023.142421
BibTeX
@article{Khudyshkina2023,
author = {Khudyshkina, Anna D. and Butzelaar, Andreas J. and Guo, Yiran and Hoffmann, Maxi and Bergfeldt, Thomas and Schaller, Mareen and Indris, Sylvio and Wilhelm, Manfred and Théato, Patrick and Jeschull, Fabian},
title = {From lithium to potassium: Comparison of cations in poly(ethylene oxide)-based block copolymer electrolytes for solid-state alkali metal batteries},
journal = {Electrochimica Acta},
year = {2023},
volume = {454},
pages = {142421},
doi = {10.1016/j.electacta.2023.142421}
}
EUVIMED