EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Small-scale aqueous suspension preparation using dual centrifugation: the effect of process parameters on the sizes of drug particles

Nadina Zulbeari, Nanna Einshøj Lund, René Holm

European Journal of Pharmaceutical Sciences · 2025-02 · 205 · 106980

DOI: 10.1016/j.ejps.2024.106980 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Pharmaceutical Sciences, 2025-02. Verfasst von Nadina Zulbeari und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Chemistry, and Pharmacy, University of Southern Denmark, Campusvej 55 5230, Odense, Denmark. Hauptthemen laut MEDLINE: Drug Compounding. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Novo Nordisk Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The dual centrifugation approach has in the recent years emerged as a powerful milling tool to prepare pharmaceutical suspensions in submicron range with a fast-milling capacity by milling 40 samples simultaneously in 2 mL vials. While there is some standardized milling conditions described in the literature when preparing aqueous suspensions with dual centrifugation, a more systematic and experimental understanding of the milling process to evaluate the impact of different process variables in the dual centrifuge on the final sizes of the suspended drug particles independent of the drug compound used was desired. Overall, the present study demonstrated the applicability of the dual centrifuge for small-scale screening purposes and showed the impact of process parameters on the physical attributes of prepared suspensions. In the present work, the rate of size reduction on three different model compounds, i.e., cinnarizine, haloperidol, and indomethacin, was found to be mostly influenced by the milling speed, size of milling beads, and the bead loading during milling, whereas the rotor temperature did not affect the particle size profiles when stabilized with polysorbate 20 during milling with dual centrifugation. Smaller particle sizes were in general obtained at the highest milling intensity, i.e., 1500 rpm, smallest bead size, i.e., 0.2 mm, and higher bead loadings (42 %, 56 %, and 83 %). The grinding limit of approximately 0.50 µm, 0.70 µm, and 0.35 µm for cinnarizine, haloperidol, and indomethacin, respectively, was achieved relatively fast, i.e., 30 min of milling at the specified conditions, compared to when suspensions were milled with larger bead sizes (i.e., 1.0 mm), lower milling intensities (e.g., 1000 rpm), and lower bead loadings (e.g., 14 or 28 %). The study further confirmed that a higher milling intensity was necessary during milling of haloperidol suspensions probably due to the compounds predominantly plastic properties. Sizes of indomethacin particles increased with longer milling runs up to 240 min and also higher bead loadings of 56 % and 83 %. These observations were further supported by the color conversion from white to yellow of indomethacin suspensions which indicated generation of small quantities of amorphic material after milling with a high milling intensity. Upscale investigations showed comparable particle size profiles for all three model compounds while milling at 1500 rpm for five minutes.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Drug CompoundingParticle SizeSuspensionsCentrifugationIndomethacinHaloperidolCinnarizinePolysorbatesChemistry, Pharmaceutical

Stichwörter der Autor:innen

Dual centrifugeLong acting injectableNano- and microsuspensionsParticle size profilesProcess investigationWet bead media milling

Substanzen

SuspensionsIndomethacinHaloperidolCinnarizinePolysorbates

Autor:innen und Institutionen

  • Department of Physics, Chemistry, and Pharmacy, University of Southern Denmark, Campusvej 55 5230, Odense, Denmark.
  • Department of Physics, Chemistry, and Pharmacy, University of Southern Denmark, Campusvej 55 5230, Odense, Denmark. Electronic address: reho@sdu.dk.

Förderung

  • Novo Nordisk Foundation

Zitieren

APA

Zulbeari, N., Lund, N. E., & Holm, R. (2025). Small-scale aqueous suspension preparation using dual centrifugation: the effect of process parameters on the sizes of drug particles. European Journal of Pharmaceutical Sciences, 205, 106980. https://doi.org/10.1016/j.ejps.2024.106980

Vancouver

Zulbeari N, Lund NE, Holm R. Small-scale aqueous suspension preparation using dual centrifugation: the effect of process parameters on the sizes of drug particles. European Journal of Pharmaceutical Sciences. 2025;205:106980. doi:10.1016/j.ejps.2024.106980

BibTeX
@article{Zulbeari2025,
  author = {Zulbeari, Nadina and Lund, Nanna Einshøj and Holm, René},
  title = {Small-scale aqueous suspension preparation using dual centrifugation: the effect of process parameters on the sizes of drug particles},
  journal = {European Journal of Pharmaceutical Sciences},
  year = {2025},
  volume = {205},
  pages = {106980},
  doi = {10.1016/j.ejps.2024.106980}
}
Kostenlos starten →