EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polymer extrusion filter remaining useful life dataset from contamination experiments

Corentin Ferreira, Ben Ko, Wen Li, Kevin Otto

Data in Brief · 2026-08 · 69 · 113254

DOI: 10.1016/j.dib.2026.113254 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Data in Brief, 2026-08. Verfasst von Corentin Ferreira und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, The University of Melbourne, 3010 Parkville, Victoria, Australia. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Melbourne.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Predictive Maintenance has become an essential objective in industry as it has the potential to decrease unplanned downtime, reduce inventories of replacement parts and increase operational safety, by identifying and predicting the time of failures. To develop accurate predictive maintenance systems, sufficient historical data to failure must be acquired. While such datasets are publicly available for components (i.e. bearing and motors), their public availability for industrial manufacturing systems is limited. This article presents a time-series dataset for the run-to-failure of single-screw polymer extruder filters. The dataset includes the temperatures along the barrel of the extruder, screw motor voltage and current at 1 Hz. The current intake of the extruder is also provided and acquired at 1 kHz, to support feature engineering works. Data is collected for 60 run-to-failures during the extrusion of low-density polyethylene. Two failure modes were recorded: full filter clogging, preventing the extrusion of the material, and filter failure, where the material accumulates until the filter bursts. The established dataset can be used to develop and verify state-of-the-art predictive maintenance models under industrial conditions, physics-based models, feature engineering and multi-rate data fusion methodologies.

Schlagwörter

Stichwörter der Autor:innen

ClassificationManufacturingPredictive maintenancePrognosticsRemaining useful lifeTime-series

Autor:innen und Institutionen

  • Department of Mechanical Engineering, The University of Melbourne, 3010 Parkville, Victoria, Australia.

Förderung

  • University of Melbourne

Zitieren

APA

Ferreira, C., Ko, B., Li, W., & Otto, K. (2026). Polymer extrusion filter remaining useful life dataset from contamination experiments. Data in Brief, 69, 113254. https://doi.org/10.1016/j.dib.2026.113254

Vancouver

Ferreira C, Ko B, Li W, Otto K. Polymer extrusion filter remaining useful life dataset from contamination experiments. Data in Brief. 2026;69:113254. doi:10.1016/j.dib.2026.113254

BibTeX
@article{Ferreira2026,
  author = {Ferreira, Corentin and Ko, Ben and Li, Wen and Otto, Kevin},
  title = {Polymer extrusion filter remaining useful life dataset from contamination experiments},
  journal = {Data in Brief},
  year = {2026},
  volume = {69},
  pages = {113254},
  doi = {10.1016/j.dib.2026.113254}
}
Kostenlos starten →