Thermal-porosity characterization data of additively manufactured Ti–6Al–4V thin-walled structure via laser engineered net shaping
Data in Brief · 2023-12 · 51 · 109722
DOI: 10.1016/j.dib.2023.109722 ↗Kurz gefasst
Fachartikel in der Zeitschrift Data in Brief, 2023-12. Verfasst von Christian Zamiela und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial and Systems Engineering, Mississippi State University, Mississippi State, MS 39762, United States. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Center for Advanced Vehicular Systems, Mississippi State University, Mississippi State University.
Abstract (Originalsprache)
In-process thermal melt pool images and post-fabrication porosity labels are acquired for Ti-6Al-4V thin-walled structure fabricated with OPTOMEC Laser Engineered Net Shaping (LENS™) 750 system. The data is collected for nondestructive thermal characterization of direct laser deposition (DLD) build. More specifically, a Stratonics dual-wavelength pyrometer captures a top-down view of the melt pool of the deposition heat-affected zone (HAZ), which is above 1000∘C, and Nikon X-Ray Computed Tomography (XCT) XT H225 captures internal porosity reflective of lack of fusion during the fabrication process. The pyrometer images provided in Comma Separated Values (CSV) format are cropped to center the melt pool to temperatures above 1000℃, indicative of the shape and distribution of temperature values. Melt pool coordinates are determined using pyrometer specifications and thin wall build parameters. XCT porosity labels of sizes between 0.05 mm to 1.00 mm are registered within 0.5 mm of the melt pool image coordinate. An XCT porosity-labeled table provided in the Excel spreadsheet format contains time stamps, melt pool coordinates, melt pool eccentricity, peak temperature, peak temperature coordinates, pore size, and pore label. Thermal-porosity data utilization aids in generating data-driven quality control models for manufacturing parts anomaly detection.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Industrial and Systems Engineering, Mississippi State University, Mississippi State, MS 39762, United States.
- Center for Advanced Vehicular Systems (CAVS), Mississippi State University, Mississippi State, MS 39762, United States.
- School of Manufacturing Systems and Networks, Arizona State University, Mesa, AZ 85296, United States.
Förderung
- Center for Advanced Vehicular Systems, Mississippi State University
- Mississippi State University
Zitieren
APA
Zamiela, C., Tian, W., Guo, S., & Bian, L. (2023). Thermal-porosity characterization data of additively manufactured Ti–6Al–4V thin-walled structure via laser engineered net shaping. Data in Brief, 51, 109722. https://doi.org/10.1016/j.dib.2023.109722
Vancouver
Zamiela C, Tian W, Guo S, Bian L. Thermal-porosity characterization data of additively manufactured Ti–6Al–4V thin-walled structure via laser engineered net shaping. Data in Brief. 2023;51:109722. doi:10.1016/j.dib.2023.109722
BibTeX
@article{Zamiela2023,
author = {Zamiela, Christian and Tian, Wenmeng and Guo, Shenghan and Bian, Linkan},
title = {Thermal-porosity characterization data of additively manufactured Ti–6Al–4V thin-walled structure via laser engineered net shaping},
journal = {Data in Brief},
year = {2023},
volume = {51},
pages = {109722},
doi = {10.1016/j.dib.2023.109722}
}
EUVIMED