Drying characteristics of carrot slices in a novel heat pump–low-temperature regeneration desiccant wheel drying system
Case Studies in Thermal Engineering · 2026-11 · 87 · 108606
DOI: 10.1016/j.csite.2026.108606 ↗Kurz gefasst
Fachartikel in der Zeitschrift Case Studies in Thermal Engineering, 2026-11. Verfasst von Junhai Yan und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhongyuan University of Technology.
Abstract (Originalsprache)
To address the challenges of low drying efficiency, prone quality deterioration, and high energy consumption in the drying of thermosensitive agricultural products, a novel heat pump–low-temperature regeneration desiccant wheel drying system (HP-DWD) is designed and constructed. The system optimizes the refrigeration circuit through coordinated control of a four-way reversing valve and solenoid valves, and integrates functions including cascade preheating via dual condensers, precise temperature and humidity regulation, and waste heat recovery. Drying experiments are performed on carrot slices to compare the drying kinetics, product quality, and energy consumption characteristics of HP-DWD and the conventional heat pump drying system (HPD) at 35–45 °C, and to investigate the influence patterns of desiccant wheel rotation speed (40%, 70%, 100%) and regeneration temperature (50–60 °C). The results show that the performance of HP-DWD is significantly superior to that of HPD. At 45 °C, the drying time is shortened by 18%, the system performance coefficient ( COP S ) is increased by 10%, the specific energy consumption is reduced by 37%, and the exergy efficiency reaches 30.10% (an increase of 5.29 percentage points). The mean rehydration ratios of HP-DWD samples were 6.2%, 4.2%, and 5.3% higher than those of HPD samples at 35, 40, and 45 °C, respectively. The single-factor experiments indicate that the combination of 70% desiccant wheel rotation speed and 55 °C regeneration temperature achieve the optimal balance between drying efficiency and product quality. This study confirms that HP-DWD realizes the synergistic improvement of drying efficiency, product quality, and energy efficiency via structural innovation and process coordination. It provides a feasible technical solution for high-quality drying of thermosensitive, high-value-added agricultural products (including fruits, vegetables, and Chinese herbal medicines), and presents a promising industrial application prospect.
Förderung
- Zhongyuan University of Technology
Zitieren
APA
Yan, J., Wei, B., Gao, L., Liu, Y., Liu, F., & Li, K. (2026). Drying characteristics of carrot slices in a novel heat pump–low-temperature regeneration desiccant wheel drying system. Case Studies in Thermal Engineering, 87, 108606. https://doi.org/10.1016/j.csite.2026.108606
Vancouver
Yan J, Wei B, Gao L, Liu Y, Liu F, Li K. Drying characteristics of carrot slices in a novel heat pump–low-temperature regeneration desiccant wheel drying system. Case Studies in Thermal Engineering. 2026;87:108606. doi:10.1016/j.csite.2026.108606
BibTeX
@article{Yan2026,
author = {Yan, Junhai and Wei, Ben and Gao, Long and Liu, Yin and Liu, Fangxin and Li, Kaipeng},
title = {Drying characteristics of carrot slices in a novel heat pump–low-temperature regeneration desiccant wheel drying system},
journal = {Case Studies in Thermal Engineering},
year = {2026},
volume = {87},
pages = {108606},
doi = {10.1016/j.csite.2026.108606}
}
EUVIMED