EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Experimental investigation of effects of ullage height on the burning rate and heat feedback in pool fires

Xiang Zhang, Jinlong Zhao, Xinjiang Li, Hong Huang, Jianping Zhang

Case Studies in Thermal Engineering · 2024-10 · 62 · 105175

DOI: 10.1016/j.csite.2024.105175 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Case Studies in Thermal Engineering, 2024-10. Verfasst von Xiang Zhang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pool fire with varying ullage height is a common type of accident that occurs in industrial parks . This paper explores the ullage height effects on the burning rate and heat feedback in pool fires through the experimental and theoretical study. A series of experiments were conducted using heptane with four tray sizes and five ullage heights. The results show that, the burning rate initially decreases, then increases and finally decreases as the ullage height increases. These results are mainly dependent on the change of internal flame behavior and thus heat feedback mechanisms with increasing ullage height. In the small ullage height conditions, the convective heat feedback reduces substantially whereas the radiative one rises slightly. When the ullage height reaches to a certain value, the convective heat feedback suddenly increases because of the flame inside the tray. The radiative heat feedback decreases gradually as the ullage height increase continually, while the convective one becomes nearly constant. Based on these results, three regimes are identified in terms of the burning rate variation with heat feedback: (1) convection controlled, (2) convection-radiation controlled and (3) radiation controlled. The new controlling mechanism of the burning rate variation (with ullage height), as a further extension of the classic scaling model by Blinov and Khudyakov on the burning rate variation (with pool diameter), could lay a solid foundation for future studies of the other key parameters in tank fires.

Zitieren

APA

Zhang, X., Zhao, J., Li, X., Huang, H., & Zhang, J. (2024). Experimental investigation of effects of ullage height on the burning rate and heat feedback in pool fires. Case Studies in Thermal Engineering, 62, 105175. https://doi.org/10.1016/j.csite.2024.105175

Vancouver

Zhang X, Zhao J, Li X, Huang H, Zhang J. Experimental investigation of effects of ullage height on the burning rate and heat feedback in pool fires. Case Studies in Thermal Engineering. 2024;62:105175. doi:10.1016/j.csite.2024.105175

BibTeX
@article{Zhang2024,
  author = {Zhang, Xiang and Zhao, Jinlong and Li, Xinjiang and Huang, Hong and Zhang, Jianping},
  title = {Experimental investigation of effects of ullage height on the burning rate and heat feedback in pool fires},
  journal = {Case Studies in Thermal Engineering},
  year = {2024},
  volume = {62},
  pages = {105175},
  doi = {10.1016/j.csite.2024.105175}
}
Kostenlos starten →