EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Ohmic heating for glucomannan purification from porang tuber flour with evaluation of energy efficiency, process characterisation, and product quality

Wahyu Meka, Orchidea Rachmaniah, Siti Nurkhamidah, Yeni Rahmawati, Richardo Anthony Lumaksono, Alya Zahrani Zuhdan, Mahardika Fahrudin Rois, Latifa Hanum Lalasari

Case Studies in Chemical and Environmental Engineering · 2026-12 · 14 · 101483

DOI: 10.1016/j.cscee.2026.101483 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Case Studies in Chemical and Environmental Engineering, 2026-12. Verfasst von Wahyu Meka und 7 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Badan Riset dan Inovasi Nasional, Lembaga Pengelola Dana Pendidikan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated ohmic heating as an alternative to conventional heating for the ethanol-based purification of glucomannan from porang tuber flour ( Amorphophallus muelleri Blume), using NaCl pre-treatment to reduce calcium oxalate. The flour was purified in 70%, 80%, and 90% (v/v) ethanol at 70°C using ohmic heating (30 minutes) and conventional heating (30 and 60 minutes). Ohmic heating consumed 58-66% less energy than the conventional reference and reached 70°C in 7-14 minutes versus 26 minutes for conventional heating. Electrical conductivity decreased with increasing ethanol concentration, consistent with NaCl ion pairing at a lower dielectric constant. Glucomannan, calcium oxalate, moisture, and cadmium contents were comparable between heating methods at each ethanol concentration, indicating that selectivity was governed by solid-liquid equilibrium rather than the heating mechanism. Lead content increased 10- to 15-fold relative to raw flour under both methods without a consistent method-dependent pattern, attributed to co-retention with glucomannan. Ethanol concentration was the dominant factor driving quality variation. The purified product met the raw porang flour standard (SNI 7939:2020) but not the stricter refined glucomannan standard (SNI 9211:2023). Ohmic heating is therefore a viable process-intensification strategy, delivering substantial energy savings and heating-method-independent selectivity, supporting further optimisation toward refined-product-grade output.

Förderung

  • Badan Riset dan Inovasi Nasional
  • Lembaga Pengelola Dana Pendidikan

Zitieren

APA

Meka, W., Rachmaniah, O., Nurkhamidah, S., Rahmawati, Y., Lumaksono, R. A., Zuhdan, A. Z., Rois, M. F., & Lalasari, L. H. (2026). Ohmic heating for glucomannan purification from porang tuber flour with evaluation of energy efficiency, process characterisation, and product quality. Case Studies in Chemical and Environmental Engineering, 14, 101483. https://doi.org/10.1016/j.cscee.2026.101483

Vancouver

Meka W, Rachmaniah O, Nurkhamidah S, Rahmawati Y, Lumaksono RA, Zuhdan AZ, et al. Ohmic heating for glucomannan purification from porang tuber flour with evaluation of energy efficiency, process characterisation, and product quality. Case Studies in Chemical and Environmental Engineering. 2026;14:101483. doi:10.1016/j.cscee.2026.101483

BibTeX
@article{Meka2026,
  author = {Meka, Wahyu and Rachmaniah, Orchidea and Nurkhamidah, Siti and Rahmawati, Yeni and Lumaksono, Richardo Anthony and Zuhdan, Alya Zahrani and Rois, Mahardika Fahrudin and Lalasari, Latifa Hanum},
  title = {Ohmic heating for glucomannan purification from porang tuber flour with evaluation of energy efficiency, process characterisation, and product quality},
  journal = {Case Studies in Chemical and Environmental Engineering},
  year = {2026},
  volume = {14},
  pages = {101483},
  doi = {10.1016/j.cscee.2026.101483}
}
Kostenlos starten →